Network Remote Control; Support; Software Upgrade - Samsung BD-D6900 Bedienungsanleitung

Setup

Network Remote Control

The Network Remote Control function lets you
control your product from a remote device such
as a smart phone through a wireless connection
to your local area network.
To use the Network Remote Control function,
follow these steps:
1. Select On in the Network Remote Control
menu.
2. Install the Samsung network remote control
application to control your product on your
compatible portable device.
3. Make sure your portable device and your
product are connected to the same wireless
router.
4. Start the application on your portable device.
The application should find your product and
display it on a list.
5. Select the product.
6. If this is the first time you are using the
function, it will ask you to allow or deny
remote control of the product. Select Allow.
7. Follow the instructions that came with the
application to control the product.

Support

Software Upgrade

The Software Upgrade menu allows you to
upgrade the product's software for performance
improvements or additional services.
By Internet
To upgrade by Internet, follow these steps:
1. Select By Internet, and then press the
ENTER button. The Connecting to Server
message appears.
2. If there is a download available, the Download
pop-up appears with a progress bar and the
download starts.
3. When the download is complete, the Upgrade
Query window appears with three choices:
Upgrade Now, Upgrade Later, or Don't
Upgrade.
50
English
4. If you select Upgrade Now, the product
upgrades the software, turns off, and then
turns on automatically.
5. If you do not make a selection in one minute
or select Upgrade Later, the product stores
the new upgrade software. You can upgrade
the software later using the Via Download
function.
6. If you select Don't Upgrade, the product
cancels the upgrade.
NOTE
✎
` Your product must be connected to the Internet to
use the By Internet function.
` The upgrade is complete when the product turns off,
and then turns on again by itself.
` Never turn the product off or back on manually
during the update process.
` Samsung Electronics shall take no legal responsibility
for product malfunction caused by an unstable
Internet connection or consumer negligence during
a software upgrade.
` If you want to cancel the upgrade while the upgrade
software is downloading, press the ENTER button.
By Channel
Upgrade software using the broadcasting signal.
By USB
To upgrade by USB, follow these steps:
1. Visit www.samsung.com/bluraysupport.
2. Download the latest USB software upgrade
zip archive to your computer.
3. Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
4. Copy the folder to a USB flash drive.
5. No disc should be inserted in the product,
and then insert the USB flash drive into the
USB port of the product.
6. In the product's menu, go to Settings >
Support > Software Upgrade.
7. Select By USB.