Cutting Height Adjustment; Filling With Fuel - IKRA Mogatec BRM 1751 SSM TL Gebrauchsanweisung

Fig. 11 (middle position)
Fig. 12 (most upper position)

2.5 Cutting height adjustment

Adjust the cutting height according to the needs of your
lawn. The cutting height depends on the kind of lawn and
its actual height. When mowing high grass, start with the
maximum cutting height and make a second cut with a
lower cutting height.
1. Move the lever towards the front of the machine to
increase the cutting height and towards the rear to
reduce the cutting height.
2. Return the lever to the locating notch to set the de-
sired cutting height (Fig. 13).
GB | Operating Instruction
Fig. 13

2.6 Filling with fuel

WARNING!
-
-
-
Fig. 14
9
CAUTION: Never adjust the cutting height
when the engine is running. Always remove
the spark plug cap before making any adjust-
ments.
Danger of injury!
Fuel is explosive!
- Turn off and cool the motor down before
filling the tank with fuel.
- You must observe all safety instructions
relating to handing fuel.
Risk of device damage!
The device is supplied without motor oil.
Before operating, you must fill it with motor
oil.
Unscrew the tank cap and remove it. (Fig. 14)
Pour in the fuel carefully. Unleaded petrol, octane
> 90, 1 L max.
Avoid spilling !
Screw the tank cap on firmly by hand.