Setting The Energy-Saving Mode - Melitta CAFFEO BISTRO Bedienungsanleitung

10.2 Setting the energy-saving mode

After the last action, the appliance automatically (depending on the settings)
switches to energy-saving mode (the appliance thus consumes much less energy
than in stand-by mode). You can set different times for the energy-saving mode.
The appliance is factory-set at 15 minutes
Prerequisite: The appliance is in stand-by mode (see „Switching on and off"
on page 54).
Please set the energy-saving mode as follows:
• Press the buttons for one-cup dispensing
simultaneously until the four buttons are weakly illuminated.
• Press the button for coffee strength
the four possible timer settings.
→ The button for coffee strength
Your selection is shown with the bean symbols
Display
• Press the ON/OFF button
→ Depending on the selection, 1 to 4 bean symbols
confirmation. The appliance goes back to stand-by mode.
Note
You can wake up the appliance from the energy-saving mode by pressing any
of the buttons. The function of the pressed button (e.g. prepare coffee) will be
performed directly, only the heat-up phase takes a little longer.
Heft_Caffeo_Bistro_EU_2.2.indd 61
.
several times to select among
is brightly illuminated.
Time
5 minutes
15 minutes
(factory setting)
30 minutes
OFF
to confirm the selected time.
and for steam dispensing
on the display.
flash on the display as
61
09.04.2014 14:33:53