Buckling / Unbuckling Of The Baby - KIDDY Evoluna i-Size 2 Bedienungsanleitung

EN
and pull the handle outward (fig. 9, no. 2), then move it into the de-
sired position upward or downward (fig. 9, no. 3). The optimum height
position of the shoulder belts is reached when the belts are at the
babies shoulder height (fig. 10).
Lock the height adjuster handle back into place after you have fin-
ished. Please make sure that the belt system is not twisted or does
not become lodged! Close the front cover.

6.3 Buckling / unbuckling of the baby

Always buckle up your child when it is in the infant carrier!
Loosen the shoulder belts as described in point 6.1 and place them
over the side of the rim of the carrier. Place your baby in the infant
carrier and then position the shoulder belts over its shoulders (fig. 11,
no. 1).
Place the safety belt lock tongues attached to the shoulder belts over
each other (fig. 11, no. 2). Now push the safety belt lock tongues into
the buckle. It is locked in place when a click sound is heard (fig. 12).
Make certain that it is securely locked in place! Now pull the central
belt until the belt system fits the body of the child snugly (fig. 13).
Make sure that the space between the belts and your child is no more
than the width of a finger (ca. 1 cm) and that the belt system is not
twisted.
To unbuckle your baby loosen the shoulder belts as described in
point 6.1 and press the red button on the buckle to unbuckle your
baby. Now you can take the child out of the seat.
12