Replacement Parts - Beurer LB 88 Gebrauchsanweisung

Descaling the water tank
• Fill the water tank halfway with water.
• Add a small quantity of descaler.
• Tightly close the water tank using the screwed plug.
• Shake the water tank by rocking it back and forth several times.
• Empty the descaling solution completely.
• Rinse the base unit twice with clean, fresh water.
Storage
If you do not plan to use the device for a relatively long period of time, we recommend that you thoroughly
empty, clean and dry the device and store it in the original packing in a dry environment, ensuring it is not
weighed down by additional items.

9. Replacement parts

TIP!
If the water is hard, we recommend using the optional anti-limescale filter in addition to the anti-lime pads
supplied.
Anti-limescale filter (optional)
Order number 162.843. Please contact the national service address.
NOTE
• If the anti-limescale filter does not prevent limescale build-up, or if white
deposits form on or in the device, the anti-limescale filter should be replaced.
• The service life of the anti-limescale filter is around two to three months at
most.
• If the device is not used for a relatively long time, the anti-limescale filter must
be removed from the water tank and dried out.
Fitting the anti-limescale filter
• Lift the water tank and rotate it.
• Open the screwed plug on the water tank.
• Screw the anti-limescale filter onto the screwed plug on the inside.
• Tightly seal the water tank using the screwed plug.
21