Operation; Functions On The Control Panel; Figure 9: Xanto S Control Panel (Model Xanto S 3000R) - Online USV XANTO S 700 Benutzerhandbuch

O P E R A T I O N

4. Operation

This section contains information about the use of the XANTO
S 700 - 3000VA, such as the use of the control panel on the front
side, operating modes, starting and shutting down the UPS system,
switching between different operating modes, calling up the event
log, setting the power strategy and configuring the bypass settings,
load segments, battery settings and communication.

4.1 Functions on the control panel

Figure 9: XANTO S control panel (model XANTO S 3000R
Display Status Description
ON
Flashes A new information message is active.
Green
ON
Flashes The battery voltage lies below the warning message threshold.
Yellow
ON
Yellow
ON
Red
XS700-XS3000_manual_ger_eng_it_V1.1.0.doc
The UPS system is running in normal mode.
The UPS system is in battery mode.
The UPS system is in bypass mode.
The UPS system functions during the HE mode properly in
the bypass mode.
A warning message is active or there is a fault present
(see Troubleshooting).
Table 2: Display descriptions
96 / 222
...........................................................
)
R. Kistler