Odour filters (Recirculation version)
REPLACING ACTIVATED CHARCOAL FILTERS
• These filters are not washable and cannot be regenerated, and
must be replaced approximately every four months of opera-
tion, or more frequently with heavy usage.
• Open the Comfort Panel by turning the knobs provided.
• Open the glass panel.
• Remove the grease filters.
• Remove the saturated activated carbon filter by releasing the
fixing hooks
• Replace the grease filters.
• Close the glass panel again and hook up the comfort panel.
20 W halogen light.
• Remove the 2 screws fixing the Lighting support, and pull it
out of from the Hood.
• Extract the lamp from the Support.
• Replace with another of the same type, making sure that the
two pins are properly inserted in the lamp holder socket holes.
• Refit the Support, fixing it in place with the two screws re-
moved as above.
EN
Lighting
LIGHT REPLACEMENT
1 17