Franke FTC 6462 Bedienungsanleitung Und Einrichtung Seite 15

USE
T
1
TOUCH CONTROL
T1 ON/OFF Motor
T2 Speed -
T3 Speed +
T4 Intensive speed
T5 Delay
L Lighting
By pulling out the sliding panel it is possible to automatically activate all the hood functions.
By simply closing the sliding panel all the functions are switched off.
EN
T T
2 3
Control panel
FUNCTION
Switches the hood motor on and off. The latest selected
speed appears on the display.
Decreases the suction speed: V3  V2  V1
Increases the suction speed: V1  V2  V3
Activates the intensive speed from any previously selected
speed. The intensive speed can be activated even when the
motor is OFF. By pressing the same touch control once again
or by switching off the motor this function can be deacti-
vated. Intensive speed cannot be activated when the delay
function is on. Intensive speed has been timed at 10 minutes:
H appears on the display and a spot down on the right side
flashes once a second. After 10 minutes the system activates
automatically the latest selected speed.
Activates and deactivates the delayed shutdown of the hood
(motor + lighting) at 30 minutes: the selected speed of the
hood appears on the display and a spot down on the right
side flashes once a second. By pressing the same touch con-
trol once again or by switching off the motor delay function
can be deactivated.
Turns light on and off.
T T L
4 5
1 15