Remote Control; Storage / Maintenance; Eu Declaration Of Conformity - Casada QUATTROMED IV-S Bedienungsanleitung

Remote control

[1] ON/OFF Here you can switch the
Quattromed on and off. If this button is
flashing, this means that the device is in
stand-by mode. If you switch the device
off, it stops and the massage heads
revert to their starting position.
[2] HEATING turning on and off of the
heating jade massage heads.
[3] TIME (5 – 15 Minutes) The default mas-
sage time is 15 minutes. By repeatedly
pressing this button, you change the
massage duration to 5 minute intervals.
The remaining time is displayed in 5
minute intervals.
[4] Automatic programme for the entire
back
Alternating massage of the individual
parts of the back and the entire back
with the massage techniques "Kneading"
and "Rolling".
[5] Automatic programme for upper back
area Massage with alternating massage
techniques "Kneading" and "Rolling".
[6] Automatic programme for lower back
area Massage with alternating massage
techniques "Kneading" and "Rolling".
[7] V. ON/OFF Turning on and off the vibration massage in the seating area.
[8] REVERSE Changes the direction of the massage heads.
[9] KNEADING Selection key for Shiatsu kneading massage. Massage heads with circular motions
with concurrently higher roller massage.
[10] ROLLING Selection key for the stroking roller massage.
[11] SPOT Selection key for the specifically aligned massage in the massage type
„Kneading".
[12] / Control keys for the massage rollers for exact positioning on your back. During the local-
ised kneading massage, you can alter the massage area upwards or downwards by holding down
this button.
22
[1]
[2]
[3]
[4]
[5]
[6]
[7] [8]
[9]
[10]
[11]
[12]

Storage / Maintenance

With regular maintenance you can increase the service life of the Quattromed IV-S and ensure safe opera-
tion at all times.
1. Recommended storage: Dry, free of dust.
2. Keep liquids or open flames away from the Quattromed IV-S.
3. Clean the device with an imitation leather care and with a dry soft cloth.
4. Please do not dip your Quattromed IV-S into water or other liquids during cleaning.
5. Let the Quattromed IV-S dry out completely after cleaning.
6. Ensure that no moisture penetrates the device via the buttons in the remote control.
7. Disconnect the Quattromed IV-S from the main power supply when it is not in use.
Specifications Quattromed IV-S
Backrest dimensions: 76 x 45 x 15 cm
Seat part dimensions: 41 x 45 x 8 cm
Weight: 9 kg
Voltage:
Input: AC ~ 100 -240 V, 50/60 Hz
Output: DC 24 V, 2000 mA
Nominal power:
In operation: max. 48 Watt
Stand-by mode: < 1 Watt
Automatic runtime: 15 minutes
Certificates:

Eu Declaration of Conformity

Compliant with European regulatory standards EMC 2014/30/EU and LVD 2014/35/EU.
23