Bresser WoW200 Bedienungsanleitung Seite 24

2. QUICK INSTALLATION
BEFORE YOU BEGIN
For best operation,
1. Insert batteries for remote units before doing so for the main unit.
2. Position the remote unit and main unit within effective transmission
range, which, in usual circumstances, is 20 to 30 meters. Note that
the effective range is vastly affected by the building materials and
where the main and remote units are positioned. Try various set-ups
for best result. Though the remote units are weather proof, they
should be placed away from direct sunlight, rain or snow.
BATTERY INSTALLATION: REMOTE UNIT
1. Remove the screws on the battery compartment.
2. Select the channel
3. Install 2 batteries (UM-3 or "AA" size 1.5V) strictly according to the
polarities shown or remove the insulating strip.
4. Operating the remote unit with the supplied power supply activates
the display's background illumination.
TURN ON MAIN UNIT
Install 2 batteries (UM-3 or AA size 1.5V) strictly into the main unit and
plug the AC-adaptor to give power to the main unit as well, you will see
the display is lighted up.
LOW BATTERY WARNING FOR THE REMOTE SENSOR
When it is time to replace batteries for the remote sensor, the respective
low battery indicator
tery indicator
Remote Sensor Unit.
FOR THE MAIN UNIT
When the battery power is not enough, there is a battery icon
be shown on the display, so we need to use the new batteries. If the AC-
adaptor cannot connect to the Main Unit properly, or the AC-adaptor is
will show up on display. In addition, the low bat-
will show up on the Main Unit display for this specified
24
will