Technical Specifications - Grillo CLIMBER 8.22 Bedienungsanleitung

Climber 8.22/ Translation of the original instructions
WARRANTY
The guarantee is given in compliance with the current law. The dealer will have to give the client a
copy of the registration card of the machine, which they will print up from the Grillo website. For the
engine the guarantee of the relative manufacturers apply.
RECOMMENDED LIST OF SPARE PARTS TO BE KEPT IN STORE
2 x mowing blades
2 x blade screws
2 x blade screw nuts
1 x set of belts
1 x engine air filter
1 x engine oil filter
1 x throttle cable
2 x wiring system fuses

TECHNICAL SPECIFICATIONS

ENGINE: BRIGGS & STRATTON 7220 PROFESSIONAL SERIES, OHV, 656cc, twin-cylinder petrol
engine with oil pump
STARTING SYSTEM: electric with battery 12V.
GEARBOX: hydrostatic transmission.
DIFFERENTIAL: locking device with pedal engagement.
CLUTCH: electromagnetic with PTO and blade brake
GROUND SPEED: continuously variable from 0 to 10 km/h and reverse speed from 0 to 6 km/h.
TYRES: front 3,50-6 TRACTOR – rear 18×9.50-8 TRACTOR.
BRAKE: service brakes on the front wheels with pedal engagement; parking brake on the rear wheels
with lever engagement.
OPERATOR SEAT: sprung and adjustable, equipped with roll-bar
CUTTING DECK: rear/side discharge.
CUTTING SYSTEM: 1 rotating blade.
CUTTING WIDTH: 910 mm.
BLADE SPEED: 81 m/sec.
CUTTING HEIGHT: from 35 mm to 110 mm with 6 cutting positions and 1 for travelling.
HOURLY CUTTING CAPACITY: 7000 m 2 /h (indicative)
INTERNAL STEERING RADIUS: 50 cm.
FUEL TANK: 7 litres EMERGENCY SUPPLY: 1 litre
TOW BAR AND FRONT LIGHT ARE STANDARD FEATURES
ATTACHMENTS: 125 cm orientable snow blade, snow chains for rear wheels.
SIZES: Length: 1895 mm, Width: 990 mm, Height: 980 mm.
WEIGHT: 265 kg
7