6.2
Activities during operation
6.2.1 Clipping
1. Fix and calm the animal sufficiently before clipping.
2. Switch on the clipper already in the field of vision of the animal.
3. Approach to the animal from ahead.
4. During clipping, look at the behaviour of the animal.
6.2.2 Changing the battery
When the battery is unloaded, the clipper is turned off by a protective circuit.
Fig. 18
Fig. 19
6.2.3 Changing the clipperhead
Fig. 20
14
1. Move the switch to position "0"
(fig. 4).
2. Push the battery interlock (2) on
both sides inward and pull the
battery (1) out of the clipper.
3. Insert charged battery (1) into
the shearer (2), until the battery
lock is locked in on both sides.
1. Move the switch to position "0"
(fig. 4).
2. Push the interlock clipperhead.
Instruction Manual / Small animal clipper