Technical Specifications; Noise And Vibration Information - Sparky SMA 728E Originalbetriebsanleitung

Technical specifications

Model
Power input
Rated speed
Sanding head diameter
Accessory max. diameter
Sanding head height
Overall dimensions
Length
Width
Height
Weight (EPTA Procedure 01/2014)
Protection class (EN 60745-1)

NOISE AND VIBRATION INfORMATION

Measured values determined according to EN 60745.
Noise emission
A-weighted sound pressure level L
Uncertainty К
pA
A-weighted sound power level L
Uncertainty К
wA
Wear hearing protection!
Vibration emission *
Total vibration values (vector sum in the three axes) determined according to EN 60745:
Sanding
Vibration emission value a
Uncertainty К
DS
* The vibration emission values are determined according to 6.2.7 EN 60745.
The vibration emission level given in this information sheet has been measured in accordance with
a standardised test given in EN 60745 and may be used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool
is used for different applications, with different accessories or poorly maintained, the vibration emis-
sion may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may significantly reduce
the exposure level over the total working period.
Other applications such as cutting-off or wire brushing may have different vibration emission values.
Dust from material such as paint containing lead, some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may cause allergic reactions and/or respiratory dis-
eases to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic such as oak and beech dust especially in conjunc-
tion with additives for wood conditioning (chromate, wood preservative). Material containing asbestos
must only be treated by specialists.
▪ Where the use of a dust extraction device is possible it shall be used.
▪ The work place must be well ventilated.
▪ The use of a dust mask of filter class P2 is recommended.
Follow national requirements for the materials you want to work with.
Original instructions
pA
wA
h,DS
SMA 728E
750 W
750 - 2450 min
-1
150 mm
180 mm
15 mm
465 mm
150 mm
170 mm
2,7 kg
II
89 dB(А)
3 dB(A)
100 dB(А)
3 dB(A)
2,5 m/s
2
1,5 m/s
2
3
EN