Inhaltsverzeichnis
Werbung
en
Freezer section
Adjusting the temperature
You can adjust the required temperature
in the range of -16 °C to -26 °C (factory
setting -18 °C) for the freezer section.
To change the required temperature:
S Touch the freezer section button.
S Use the < or > buttons to adjust the
temperature to the required value.
S Acknowledge with ok.
Super
When super mode is on, the freezer
section is cooled as cold as possible
(-26 °C) for approx. 53 hours. Then the
appliance automatically switches to the
temperature set prior to super mode.
Super mode is used to freeze fresh food
and, depending on the quantity, should
be switched on up to 3 hours before the
food is placed in the freezer section.
To switch on super mode:
S Touch the super/freezer section
button.
Super mode is on when the message and
the new required temperature are on the
standard display.
36
Switching the sections
on and off
Switching off the section
Fig. 2
S Press the On/Off button for the
compartment.
The "Off" message is indicated on the
standard display instead of the required
temperature of the section which has
been switched off.
Switching off the appliance
S Switch off the other sections as
described previously.
When the last section has been switched
off, the display (standard display) goes
out.
Note:
- The sequence of in which the sections
are switched off is insignificant.
- The described displays refer to the
standard display only. If other displays
are active, switch to the standard
display with the menu button. When all
sections have been switched off, the
display goes out.
Switching on the section
Fig. 2
S Press the On/Off button for the
compartment.
The display indicates the required
temperature of the section which has
been switched on.
Werbung
Inhaltsverzeichnis
