Troubleshooting; Technical Data; Declaration Of Conformity - Silk'n AP-3WD Bedienungsanleitung

Troubleshooting

First try to solve the problem yourself by taking the measures listed below:
Problem
The callus remover is not functioning.
The callus remover is running very slowly.
One of the MicroPedi rollers is damaged.
If these measures are unsuccessful or your callus remover needs to be repaired, contact
Customer Service via the details on the warranty card.

Technical data

Model:
Batteries:
Voltage:
Power consumption:
Speed:
Dimensions (H × W × D):
Weight without batteries:
Storage temperature:

Declaration of conformity

The EU declaration of conformity can be requested under the address shown on
the back.
Possible causes and remedy
The batteries (9) may not have been inserted
properly.
• Take the batteries out and reinsert them,
checking for correct polarity.
The batteries (9) may be empty.
• Change the batteries for new ones.
The batteries (9) may be almost empty.
• Change the batteries for new ones.
• Change damaged MicroPedi rollers for
original spare parts.
AP-3WD
LR06/AA, 2×
3 V DC
3.4 W
2,300 rpm +/– 20%
approx. 15.5 × 6.0 × 3.5 cm
approx. 127 g
0−40 °C
27
EN