Preparing The Appliance; Installation - Gaggenau AF2 SERIE Gebrauchs- Und Montageanleitung

Body wall thickness: 16 mm
1 Screw the mounting pieces to the body on the left
¨
and right.
2 Remove the tabs from the bottom of the mounting
©
pieces.
Body wall thickness: 19 mm
1 Fold out the tabs on both of the mounting pieces.
¨
2 Screw the mounting pieces to the body on the left
©
and right.
3 Remove the tabs from the bottom of the mounting
ª
pieces.

Preparing the appliance

1 Connect the power cord provided to the
¨
appliance.
2 Use the strain relief to secure the power cord in
©
place.

Installation

Sliding the appliance up into place
1 Slide the appliance up into place and make sure it
is positioned correctly.
2 Measure the distance between the appliance and
the wall, and mark this on the filler strip.
3 If required, shorten the filler strip to the required
©
dimension.
¨
31