ProMed Feeling Gebrauchsanleitung Seite 22

I
NFORMATION ON THE UNIT
DE
Before operating the unit for the first time, please check that all
contents have been delivered and that the line voltage is correct.
EN
The supplied power adapter (G) is an electronic power supply
unit intended for an operating voltage of 100 V~ to 240 V~.
FR
• The Promed feeling unit uses a high performance motor.
The electronic speed control is used to smoothly set the
IT
speed of the grinding head. The unit can rotate clockwise or
counterclockwise (reversible).
ES
• The grinding head holder is able to fixate all commercial
NL
grinding heads with standardized dental size shafts of 2.332
to 2.350 mm (0.091 - 0.093 inches). Please use only high-
RU
quality grinding heads with a rounded shaft end and a
maximal shaft length of 36 mm (1.26 inches) to guarantee the
PL
longest life possible for the grinding head holder!
• Always make sure that the grinding head does not come
SE
in contact with other objects when you lay the handpiece
down. There is a risk of the shaft becoming compressed and
FI
/
ACCESSORIES
• Grinding head bits are available at your local specialist retailer
• To ensure hygienic operation, the grinding heads must be
• The handpiece may only be disinfected using disinfectant wipes.
• Information about suitable disinfectants and products can be
asymmetrical. Asymmetry in the grinding head causes damage
to the handpiece!
or Promed. (www.promed.de).
disinfected after use.
obtained from Promed.
For disinfection of instruments and grinding heads:
Promed Pure ID (Product No. 330810)
For disinfection of surfaces and devices:
Promed Pure FD (Product No. 330815)
For disinfection and cleaning of instruments and grinding
heads: Promed UC-50 (Product No. 330210)