Computer | Use - Skandika Fitness Rudergerät Adria Aufbau- Und Bedienungsanleitung

COMPUTER | USE

Exercise computer
The computer is designed for easy use and provides an easy-
to-read display. It will start working automatically when
exercising or pressing any button. After approx. 4 minutes
without any activity the computer will automatically switch off.
If you want to start exercise again, the accumulated exercise
data will continue to count.
Remove the battery from the device if it is not going to be used
for an extended period to avoid damages due to battery acid.
Insert / replace battery
Before you can use the computer, 1 battery need to be inserted.
The battery compartment lid is located on the backside of the
computer.
Open it an insert the included battery. Ensure correct polarity
when inserting the battery (as marked in the battery compart-
ment).
Exchange the battery, if the display quality gets poor or if the
display shows nothing after switching on the device. By removing the batteriy, all values will be set to
zero.
Please pay attention to our battery disposal instructions.
Use and functions
After power-on, the computer operates in „auto-scan" mode, which shows all function values in the
lower display line in sequence for approx. 6 seconds. A small arrow on the bottom display border will
point to the currently displayed function description. If you want the computer to show only one function
value constantly, you may select this value by pressing the „MODE"-button multiple times.
Press and hold the „RESET"-button for approx. 4 seconds to set all values to zero.
With the „SET"-button you can preset values for some functions. How this works in detail, we will
explain later in this manual.
Press the „ST/STOP"-button when you start to exercise.
24