Notes
• This system supports only the reading of
data on a "Memory Stick Duo." "Memory
Stick Duo" formatting and writing cannot
be performed.
• This system does not support parallel
high-speed data transfer.
• When you format a "Memory Stick Duo,"
all the data will be erased. To avoid
erasing important data by accident, make
sure to check the content before
formatting.
• To format a "Memory Stick Duo," use a
formatting application that is compatible
with the "Memory Stick Duo." When
formatting the "Memory Stick Duo," do not
use the format function on the Windows
Explorer.
• Standard-size "Memory Stick" cannot be
used in this system.
• When using a "Memory Stick Duo," make
sure to check correct insertion direction.
Wrong usage may cause trouble with the
system.
• Do not place the "Memory Stick Duo"
within the reach of a small child to prevent
him from swallowing it by accident.
• Avoid removing the "Memory Stick Duo"
from the system while the system is
reading data.
• Data may be damaged in such occasions:
– "Memory Stick Duo" is removed or the
system is turned off during a read
operation.
– "Memory Stick Duo" is used in a location
subject to static electricity or electrical
noises.
22
• We recommend that you save backup of
the important data.
• Do not bend, drop or apply strong shock to
the "Memory Stick Duo."
• Do not disassemble or modify the
"Memory Stick Duo."
• Do not allow the "Memory Stick Duo" to
get wet.
• Do not use or store the "Memory Stick
Duo" in a location that is subject to:
– Extremely high temperature, such as in
a car parked in the sun
– Direct sunlight
– High humidity or places with corrosive
substances
Connector
Write-protect
switch
Memo area
• Do not touch the "Memory Stick Duo"
connector with your finger or metallic
objects.
• You cannot record, edit or delete data if
you slide the write-protect switch to LOCK.
• When you slide the write-protect switch of
the "Memory Stick Duo," use a thin-
pointed device.
• When you use a "Memory Stick Duo"
without the write-protect switch, be careful
not to edit or delete the data by accident.
• When you write on the memo area of the
attached label, do not write forcefully.