Product Description; Introduction; Equipment And Scope Of Delivery - Mettler Toledo InPro 7000-VP Series Bedienungsanleitung

InPro 7000-VP Series
1

Product description

1.1

Introduction

Conformity
InPro 7000-VP Series 2-electrode sensors are in conformance with the
follow ing regulations (exceptions are described in section 1.3):
Low voltage
guidelines:
EMC Guidelines:– EU Guidelines
Explosion protection
Certificates
CE, Quality, Material Certificate following EN 10204 (3.1B) for sensor with
316L SS electrodes, ATEX EU Guideline 94 / 9 / EWG.
Markings
The markings labeled on each sensor state the following information:
METTLER TOLEDO
InPro700x-VP
Cell M: XXXXXX
Serial No: XXXXXXXXX
1.2

Equipment and scope of delivery

Scope of delivery
The InPro 7000-VP Series sensors are delivered ready for use. Each sen-
sor is accompanied by this instruction manual, an individual «Certificate
of Quality» and a Material Certificate following EN 10204 (exceptions:
InPro 7000-VP and InPro 7005-VP). Other Certificates may be included as
© 11 / 13 Mettler-Toledo AG, CH - 8606 Greifensee
Printed in USA
– EU Guidelines
– Swiss Guidelines
– Safety Guidelines
– IP protection rating
– Swiss Guidelines
– Emission
– Immunity
– 94/9/EG
– SNCH 04 ATEX 3637 X
– L-5201 Sandweiler, SNCH 0499
Temp. M: XXXXXX
Order No: XXXXXXXX
2006/95/EC
SR 734.26 NEV
EN61010-1
EN60529 IP68 (VP connector)
2004/108/EC
SR 734.5 VEMV
EN55022
EN55024
CH-8902 Urdorf
II 1/2 G Ex ia IIC T3/T4/T5/T6
see instruction manual
SNCH 04 ATEX 3637 X
InPro 7000-VP Series
5
0499
52 002 091