After-Sales Service And Application Service - Bosch GAS 25 L SFC Professional Originalbetriebsanleitung

OBJ_BUCH-464-008.book Page 14 Monday, December 12, 2016 2:10 PM
14 | English
 For safe and proper working, always keep the vacuum
cleaner and ventilation slots clean.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
A dust-technical inspection is to be carried out at least once
every year by the manufacturer or an instructed person, e. g.
for damage of the filter, tightness against leakage of the vacu-
um cleaner and function of the control/monitoring unit.
For category L vacuum cleaners that were in contaminated
environments, the exterior as well as all machine parts should
be cleaned or treated with sealants. When performing mainte-
nance and repair work, all contaminated components that
cannot be cleaned to satisfactory must be disposed of. Such
components must be disposed of in impermeable plastic bags
conforming with the valid regulations for the disposal of such
waste.
For maintenance on behalf of the user, the vacuum cleaner
must be disassembled, cleaned and maintained as far as fea-
sible, without causing a risk for the maintenance personnel or
other persons. Prior to disassembly, the vacuum cleaner
should be cleaned in order to prevent any risks. The room/en-
closure in which the vacuum cleaner is disassembled should
be well ventilated. Wear personal protective equipment dur-
ing maintenance. After the maintenance, the maintenance ar-
ea should be cleaned.
Removing/Replacing the Folded Filter (see figure C)
Replace a damaged pleated filter 12 immediately.
– With a coin or similar, rotate the lock 6 by 1/4 turn in the
direction of the arrow and push the lock in.
– Fold up the vacuum lid 3 and hold it. Grasp the folded filter
12 by the fins, pull up and remove.
– Clean the folded filter 12.
– Insert new or cleaned folded filter 12 and ensure firm seat-
ing.
– Fold the vacuum lid 3 down again. With slight pressure
from above on the cover, the lock 6 will snap back again.
Container
– Wipe out the container 9 from time to time with a commer-
cially available, non-scouring cleaning agent and allow to dry.
Motor Protection Filter (see figure C)
– The motor protection filter 13 is basically maintenance-
free. Take out the motor protection filter from time to time
and flush it with clear water. Allow the motor protection fil-
ter to dry thoroughly before reinserting.
Level Sensors (see figure D)
Clean the level sensors 14 occasionally.
– Unlock the latches 10 and remove the vacuum lid 3.
– Clean the level sensors 14 with a soft cloth.
– Reattach the vacuum lid 3 again and lock the latches 10.
Malfunctions
In the case of insufficient vacuuming performance, check the
following:
– Is the vacuum lid 3 attached properly?
– Is the hose system clogged?
1 609 92A 2N2 | (12.12.16)
– Are the extension tubes connected firmly?
– Is the container 9 full?
– Is the dust bag 11 full?
– Is the folded filter 12 clogged with dust?
Emptying at regular intervals ensures optimum vacuuming
performance.
If the vacuuming performance is not achieved thereafter, take
the vacuum cleaner to customer service.

After-sales Service and Application Service

In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0844) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Bosch Power Tools