Important:
+
Service and maintenance: Seals
degrade in the course of time.
After valve assembly / disassembly
check that the union nut is tight and
retighten as necessary.
15 Disassembly
Disassembly is performed observing
the same precautionary measures as for
assembly.
Disassemble the valve (see chapter 12.1
G
"Disassembly of actuator and gasket 4").
Unscrew the control medium line (see
G
chapter 11.3 "Connecting the control
medium")
16 Disposal
All valve parts must be
G
disposed of according to
relevant local or national
disposal regulations /
environmental protection
laws.
Pay attention to adhered
G
residual material and gas
diff usion from penetrated
media.
17 Returns
Clean the valve.
G
Returns must be made with a completed
G
declaration of return (included).
If not completed, GEMÜ cannot process
credits or
repair work
but will dispose of the goods at the operator's
expense.
Note for returns:
+
Legal regulations for the protection
of the environment and personnel
require that you include the
completed and signed goods
return declaration (attached) with
the dispatch documents. Your
returned goods can be processed
only when this declaration is
completed.
18 Information
Note concerning the EC
+
Machinery Directive 2006/42/EC:
A Declaration of Incorporation in
accordance with the EC Machinery
Directive 2006/42/EC accompanies
this product.
For incorporation in an
+
installation classed as a
machine:
The commissioning is prohibited
until it has been determined that
the machine (plant) in which this
product is to be incorporated
complies with the provisions of
the EC Machinery Directive
2006/42/EC.
Note on staff training:
+
Please contact us at the address
on the last page for staff training
information.
Should there be any doubts or misunder-
standings in the preceding text, the German
version of this document is the authoritative
document!
33 / 40
514_us