Talking To Your Baby; Lullabies - NUK Eco Control Audio 530D+ Bedienungsanleitung

6.9 Talking to your baby

You can use the "Talk back" function to
speak to your baby.
1. Hold down the TALK 24 button on the
parent unit.
The display 17 shows the
TALK symbol.
2. At the same time, speak into the
microphone 27 on the parent unit.
Your baby can now hear your voice from
the loudspeaker 3 on the baby unit.
3. Release the TALK 24 button in order to
hear the baby's reaction.
The TALK symbol disappears.
Notes:
– If the baby unit 1 is in Eco-Mode, this
function is deactivated so that you do
not inadvertently wake your baby. In
this case, two consecutive beeps will
remind you that the talk-back function
is currently not available.
The display 17 shows a
flashing TALK symbol.
– If the volume of the parent unit is set to
"MUTE" (see "6.6 Mute setting" on
page 39), it
increased to level 1 as soon as you
press the TALK 24 button.

6.10 Lullabies

To soothe baby to sleep, you can play
lullabies on the loudspeaker 3 of the baby
unit.
Note: You can alternatively switch the
lullabies on and off from the baby unit itself
(see "5.3 Lullabies" on page 36).
The previously selected lullaby will play in a
loop for about 20 minutes and the "Lullaby"
function will then automatically switch off.
1. You activate the function by briefly pressing
the Lullabies on/off button 23.
will automatically
The first song will be played and
at the same time the musical
note symbol will appear on the
display 17 of the parent unit.
A choice of four different lullabies and one
track of natural sounds are available.
2. You switch to the next song by holding
down the Lullabies on/off button 23.
The musical note symbol on the
display 17 will flash briefly and
then the next song will be
played.
3. You switch the function off by again
briefly pressing the Lullabies on/off
button 23.
The musical note symbol disappears.
Caution! We recommend that you do not
use the mute setting on the parent unit while
lullabies are being played, because this
would leave you
functions at all and quite unable to hear if
your baby cries.
Note: The five LEDs 21 are switched off
while lullabies are playing, because the
device cannot distinguish between a baby
crying and a lullaby being played, but you
will still be able to hear if your baby is crying
in the background.
be
Lullabies in Eco-Mode
Please note! There are a number of special
features while the babyphone is in Eco-
Mode (see "4.5 Eco-Mode and FULL-ECO-
CONTROL" on page 35):
• The "Lullaby" function is temporarily
deactivated
inadvertently disturb baby.
In this case the musical note
symbol will flash while the
FULL-ECO-CONTROL function
checks the connection between
the two units.
– To prevent the lullabies switching on
later, you can again press the Lullabies
on/off button 23 to immediately cancel
the function. The flashing symbol will
then disappear from the display.
41
with no monitoring
so that you do not