TEFAL P43606 Bedienungsanleitung Seite 62

TEFAL answers your questions
Problems
If you cannot close
the lid:
If the pressure
cooker has heated
up under pressure
with no liquid
inside:
If the pressure
indicator did not
rise and nothing
escapes from the
valve during
cooking:
If the pressure
indicator has
raised but still
nothing escapes
from the valve
during cooking:
58
Recommendations
• Check that the Opening/Closing handle is in vertical
position and the jaws are open.
• Check the seal is correctly fitted, refer to the section
headed "Cleaning and Maintenance".
Have your pressure cooker checked by a TEFAL Appro-
ved Service Centre.
Contact Customer Relations Helpline.
This is normal for the first few minutes.
If the problem persists, check that:
- The heat source is sufficiently high; if not, increase it.
- There is enough liquid in the pan.
- The operating valve is positioned on
- The pressure cooker is properly closed.
- The seal or the rim of the pan is not damaged.
- The seal is correctly positioned inside the lid, refer to
the section headed "Cleaning and Maintenance".
This is normal for the first few minutes.
If the problem persists, put the pressure cooker under
cold running water until the pressure indicator drops
down.
Clean the operating valve
- fig. 16
lease outlet
is moving freely by pressing hard with a cotton bud on
- fig. 17
the ball
- fig. 15
and check that the safety valve
.
or .
and the steam re-