Backup; Configuration - mt vision HSR 8200 Bedienungsanleitung

6. The Main Menu

6.2 BackUp

Connect an external hard drive to the USB port on the back. Once the drive is recognized,
it is displayed in the list. Select this and press on Backup.
AVI Mark the checkbox if the backup videos to be saved as an AVI file.
Typ Select the type of recording (alarm, motion, both or all recordings)
Channel Choose from which camera you want to execute a backup
Start time Select the start time of recording
End time Select the end time of recording
After you finish the settings, press Add to add the recording in the transfer list. Here you
select the desired recordings with a check mark and then press the Start button to start
the backup. This process may take some time depending on the size.

6.3 Configuration

The configuration menu consists of further submenus:
Net Channel Opens the network overview. Here you can see all the devices found on
the network. In this menu, you can also add or remove new cameras.
Record Various settings when recording, such as channel name, video resolution,
frame rate, ...
Schedule Controls the recordings of the respective cameras. Recording time and
weekdays can be programmed.
P/T/Z Various network protocol settings.
Alarm Here you can define the alarm and the alarm type of the cameras. Alarms
can be sent via email or push notification to a mobile device.
ENGLISH
11