Prefader Listening To The Channels; Announcements Via The Dj Microphone; Cleaning And Maintenance - Omnitronic PM-311 Bedienungsanleitung

6.4 Prefader listening to the channels

The cue function allows monitoring each of the channels 1-3 via headphones even if the corresponding
channel is faded out. Thus, it is possible, e. g. to time the moment for fading in an audio source. Alternatively
it is possible to monitor the current music program ahead of the master control.
1
For prefader listening to a channel, press the corresponding selector switch CUE (red LED lights) and
turn the control CUE MIXING to the left stop position CUE. To monitor the current music program ahead
of the master control, turn the control CUE MIXING to the right stop position PGM.
2
Adjust the desired headphones volume with the control CUE LEVEL.

6.5 Announcements via the DJ microphone

1
Adjust the volume of the microphone announcement with the control MIC LEVEL.
2
Adjust the desired sound with the tone controls. By adjusting the controls, the high frequencies (control
HIGH) and the low frequencies (control LOW) can be boosted or attenuated within a range of ±12 dB.
3
To improve the audibility of an announcement during the current music program, press the button
TALKOVER (red LED lights) to activate the talkover function. Then during a microphone
announcement, the levels of channels 1-3 are automatically attenuated by 20 dB.

7. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
18/19 00072955.DOC, Version 1.0