EuroLite 51918630 Bedienungsanleitung Seite 25

Control-channel 4 - Functions, reset, motion macros
Decimal Hexad. Percentage
0 50 00 32 0% 20%
51 100 33 64 20% 39%
101 110 65 6E 40% 43%
111 120 6F 78 44% 47%
121 130 79 82 47% 51%
131 140 83 8C 51% 55%
141 150 8D 96 55% 59%
151 160 97 A0 59% 63%
161 170 A1 AA 63% 67%
171 180 AB B4 67% 71%
181 190 B5 BE 71% 75%
191 200 BF C8 75% 78%
201 255 C9 FF 79% 100%
This channel is only
active if channel 4
Control-channel 5
Control-channel 6
Control-channel 7
S/F
S Control-channel 5 + 6 = PAN/TILT control scanner head 1,
Control-channel 7 + 8 = PAN/TILT control scanner head 2,
Control-channel 9 + 10 = PAN/TILT control scanner head 3
S Control-channel 5 + 6 = PAN/TILT control - all 3 scanner heads
S Motion macro 1, control-channel 5 - Speed motion macro
S Motion macro 2, control-channel 5 - Speed motion macro
S Motion macro 3, control-channel 5 - Speed motion macro
S Motion macro 4, control-channel 5 - Speed motion macro
S Motion macro 5, control-channel 5 - Speed motion macro
S Motion macro 6, control-channel 5 - Speed motion macro
S Motion macro 7, control-channel 5 - Speed motion macro
S Motion macro 8, control-channel 5 - Speed motion macro
S Motion macro 9, control-channel 5 - Speed motion macro
S Motion macro 10, control-channel 5 - Speed motion macro
S Reset
is set to 0-50.
- Horizontal movement
(PAN) head 1
Push slider up in order to
move the head horizontally
(PAN).
Gradual head adjustment
from one end of the slider to
the other (0-255, 128-
center).
The head can be stopped at
any position you wish.
- Vertical movement (TILT)
head 1
Push slider up in order to
move the head vertically
(TILT).
Gradual head adjustment
from one end of the slider to
the other (0-255, 128-
center).
The head can be stopped at
any position you wish.
- Horizontal movement
(PAN) head 2
Push slider up in order to
move the head horizontally
(PAN).
Gradual head adjustment
from one end of the slider to
the other (0-255, 128-
center).
The head can be stopped at
any position you wish.
Feature
is set to 51-100.
- Horizontal movement
(PAN) head 1, 2 and 3
Push slider up in order to
move the
horizontally (PAN).
Gradual head adjustment
from one end of the slider
to the other (0-255, 128-
center).
The heads can be
stopped at any position
you wish.
- Vertical movement
(TILT) head 1, 2 and 3
Push slider up in order to
move the heads vertically
(TILT).
Gradual head adjustment
from one end of the slider
to the other (0-255, 128-
center).
The heads can be
stopped at any position
you wish.
25/27
is set to 101-200.
- Speed motion
macros
with increasing speed
heads
00065878, Version 1.0