Instructions For Total Built-In - AEG Electrolux SANTO K 9 18 40-4 i Benutzerinformation

Instructions for total built-in

Apply joint the sealing strip as
shown in figure.
Drill the unit using a Ø 2.5 mm drill
(10 mm max. penetration);
Fix the square fitting to the applian-
ce
Slide the appliance into the recess,
pushing it against the wall on the
handle side.
Fit the appliance in the niche by
making sure that it stands against
the interior surface of the unit on
the side where the door hinges of the
appliances are fitted. Insert the
appliance until the upper strip butts
up against the unit (1) Make sure
that a distance of 44 mm is main-
tained in the lower part between the
kitchen furniture and the border of
the appliance. (2).
The lower hinge cover inserted in the accessories bag, is useful to guarantee
the exact position of the kitchen furniture and the appliance.
Also make sure that the appliance does not clamp the mains cable.
30
C
C
1
Ø 2,5
D740
2
C
13mm
1
2