The Remote Control System - GM-Racing 90161.RTR Bedienungsanleitung

TOOLS
In addition to the tool that accompanied the vehicle, the following tools are useful and - in some cases -
necessary:
• Small fl at and small Phillips screwdriver e.g. No. 98116.12 and 98116.15
• Needle nose pliers
• Glow-Plug Screwdriver
• Phillips screwdriver # 1 or # 0
• Hex wrench with 1.5 mm, 2 mm and 2.5 mm

THE REMOTE CONTROL SYSTEM

Here you get an overview of the remote control system of the MT8 and its various functions and settings.
Before the fi rst trip you should know and understood these functions.
Place 8 AA batteries in the battery compartment of the transmitter and another 4 in the battery box. Pay at-
tention to the polarity!
Remote Control (transmitter)
1. On / off switch: Turns the power on/off
2. Steering wheel: Controls direction (left/right) of the model
3. Steering trim: Adjusts the "hands off" direction of the model
4. Throttle Trigger: Controls speed (forward/brake) of the model
5. Throttle Trim: Adjusts the motor speed to stop at neutral
6. Control light: indicates adequate battery power
7. Antenna: Transmits signal to the model
8. Servo reverse: Reverses the function of the steering or throttle (here are no adjustments necessary)
09 GM-Racing 90161.RTR Monster Truck MT8 Nitro
Montage Chassisseitenplatten
L/R Side Plate Assembly
GM-Racing 90161.RTR Monster Truck MT8 Nitro 22