Transport And Recycle; Technical Data - Hendi 208861 Gebrauchsanweisung

10. TRANSPORT AND RECYCLE

TRANSPORT
• Please save the packaging of the coffee machine for future transportation.
• Make sure to empty water inside the machine before transportation,
otherwise, it will damage the machine.
• After emptying the waterway, please wipe the machine both inside and
outside to dry.
• Once the empty waterway program was executed, the system will rerun
to the program of "first-time use", when the coffee machine is used again.(
refer to P6, First-time use)
• While emptying the waterway, there will be a high-temperature steam sprays
from coffee spout. Please pay special attention to avoid being scalded.
READY
FILL WATER TANK
EMPTY UNIT
RECYCLE
When recycling the machine, some inner parts can be recycled to use again.
Please pay attention to recycle them for environmental protection.

11. TECHNICAL DATA

Voltage/Frequency
Power
Pump pressure
Capacity of water tank
Capacity of bean container
Capacity of coffee grounds container 15 cakes
Capacity of the brewing unit
Adjusting height of coffee spout
Length of power cord
Net weight
Dimensions (Length×Width×Height) 450 x 302 x 370 mm
The machine is on the status of "READY".
Take out the water tank, and the machine indicates
"FILL WATER TANK".
Hold on pressing the cleaning button until the screen
shows "EMPTY UNIT", the machine begins to clean
up the waterway automatically, and steam will
spray from the coffee spout, please keep distance
to avoid scalding.
After emptying the waterway, the machine will
automatically power off. Take the drip tray out after
the power is switched off, and clear the water in the
drip tray.
220-240 V AC/50-60 Hz
1400 W
19 bar
1.8 L
250 g
7 - 14 g
80 - 115 mm
1.5 m
11.5 kg
EN
23