Representation Of Logger Results - WIKA CPH7000 Betriebsanleitung

6. Commissioning, operation

6.5.2 Representation of logger results

Representation of the logger process as table
EN
Representation of the logger process as graph
The table shows the remaining time
2 and 3 (if selected).
2
Moving the screen
4
Moving the screen
3
The graph shows the remaining time
In the lower half of the screen, a live graph
axis so that the current pressure value is always displayed.
▶
Press the [Stop] button
All measured values are displayed again before saving.
▶
The text field can be used to add a comment on the process.
12
▶ Press the [Done

46
, the individual measuring points
1
to the right or left will display the test items.
upwards or downwards will display all measurement steps.
, test items 1, 2 and 3
1
is shown. The live graph moves along the time
9
to terminate the process.
10
] button to save this process.
11
and test items 1,
5
... (if selected).
6 8
WIKA operating instructions portable process calibrator, model CPH7000
5
4
10
9
11
12
1
2
3
1
6
7
8