Cooking In The Kettle - Hot Water/Cooking - Gastroback 42438 Design Tea & More Advanced Bedienungsanleitung

TIP: To keep your working space dry and clean, we recommend to place the tea fil-
ter onto the provided stainless steel bowl. The keep warm function is limited to 80°C.
When pressing the "°C/Time" button with a program running, the actual water tem-
perature within the kettle will be shown on the display for approx. 6 seconds. There-
after the display returns to showing the time.
10. As soon as the set steeping time elapsed, an acoustic signal sounds again and
the appliance switches to the keep warm function automatically ("Warm"). Remo-
ve the tea lid by the handle and take out the tea filter. However, if the tea is still
too light and weak, you may decide to leave the tea filter within the kettle for
some additional time. To take this into account, a second signal sounds after 40
seconds.
11. After taking out the tea filter, you should replace the tea lid securely within the
tea lid ring: Holding the tea lid by the handle, insert the tea lid in the tea lid ring
with the white arrow pointing to "Open". Turn the tea lid clockwise within the
tea lid ring to "Close" to lock it securely.
IMPORTANT: Ensure that the tea lid ring is installed firmly on the kettle and the
tea lid is locked securely. Otherwise, the tea lid set could fall down during pouring.
12. If you remove the kettle from the power base after steeping to pour some tea,
the appliance will switch back to standby mode automatically. Otherwise, the
keep warm function will run for 60 minutes. Then the appliance will switch back
to standby mode. With no button pressed for another 5 minutes, the appliance
will shut off.
Note:
You may cancel any running program whenever you like. For this, simply hold the
"Start/Stop" button pressed for 3 seconds until the beep sounds.
COOKING IN THE KETTLE – HOT WATER/COOKING
By using the glass insert, you can cook various types of food within your tea kettle.
For this, the kettle must be filled with water to a filling level between 500ml (MIN)
and 1100 ml. However, you should adapt the filling level in the kettle to the amount
of food in the glass insert. Otherwise the glass insert could swim in the kettle and
therefore the stainless steel glass insert lid cannot be closed correctly. Up to 480 ml
of food may be filled into the glass insert. Please adapt your recipe. Place the glass
insert into the tea kettle via the glass insert lid set (see: 'Knowing Your New Glass
Tea Kettle'). The water within the kettle is heated to a temperature between 40°C and
100°C (boiling temperature). Select the required water temperature in standby mode.
To avoid damage and risk of scalds, do not tilt the kettle or pour
CAUTION:
63