Starting Up And Temperature Regulation; Coolmatic/Frostmatic - Electrolux JRG94886 Gebrauchsanweisung

When the temperature is being
adjusted, the temperature currently
set flashes (DESIRED temperature).
Prior to Initial Start-Up
Please clean the appliance interior and all
accessories prior to initial startup (see
section: "Cleaning and Care").
Starting up and temperature
regulation
1. Insert the plug into the plug socket.
When the refrigerator compartment
door is opened, the internal lighting is
switched on.
2. Press ON/OFF button. The green
mains pilot indicator illuminates.
3. Press either the "+" (WARMER) or "-"
(COLDER) button. The temperature
display switches
DESIRED temperature currently set
flashes on the temperature display.
4. Set the required temperature by
pressing the "+" (WARMER) or "-"
(COLDER) buttons (see section
"Temperature setting buttons"). The
temperature display will immediately
show the changed setting. With each
further press of one of the two
buttons, the DESIRED temperature is
adjusted by
temperature range: +2°C to +8°C.
Note: From a food safety point of
view, +5°C for the refrigerator
compartment
considered cold enough as a storage
temperature.
5. Once the required temperature has
been set, after a short period (approx.
5 sec.) the temperature display will
change and again indicate the current
ACTUAL temperature inside the fridge.
The display will change from flashing to
continuous illumination. The compressor
will start and then run automatically.
over and the
1°C. Adjustable
should be
Information! When the setting is
changed, the compressor does not start
immediately if automatic defrosting is
currently taking place.
As the storage temperature within
the fridge is reached quickly you
can store food immediately after
switching on.
Important! Wait until the freezer
compartment has reached a temperature
of -18 °C, before storing frozen food.

COOLMATIC/FROSTMATIC

COOLMATIC Button
The COOLMATIC function is suited
for quick cooling of large quantities
of goods in the refrigerator, e.g.
drinks and salads for a party.
1. The COOLMATIC function is switched
on by pressing the COOLMATIC
button. The yellow light illuminates.
2. The COOLMATIC
ensures intensive cooling. A DESIRED
temperature of +2°C is automatically
selected. The COOLMATIC function is
ended automatically after a period of 6
hours. The
DESIRED temperature is again valid
and the compartment will return to.
The temperature display shows the
ACTUAL refrigerator temperature.
3. The COOLMATIC function can be
ended manually at any time by
pressing the COOLMATIC button
again. The yellow light goes out.
FROSTMATIC Button
The FROSTMATIC
accelerates the freezing of fresh
food and, at the same time,
protects foodstuffs already stored from
undesirable warming.
1. The FROSTMATIC
switched on
electrolux 27
GB
function
originally selected
function
function
by pressing
now
is
the