Starting Up And Temperature Regulation; Supercool - Electrolux JRG 94886 Gebrauchsanweisung

30 electrolux
GB
Prior to Initial Start-Up
Please clean the appliance interior and all
accessories prior to initial startup (see
section: "Cleaning and Care").
Starting up and temperature
regulation
1. Insert the plug into the plug socket.
When the refrigerator compartment
door is opened, the internal lighting is
switched on.
2. Press ON/OFF button. The green
mains pilot indicator illuminates.
3. Press either the "+" (WARMER) or "-"
(COLDER) button. The temperature
display switches
DESIRED temperature currently set
flashes on the temperature display.
4. Set the required temperature by
pressing the "+" (WARMER) or "-"
(COLDER) buttons (see section
"Temperature setting buttons"). The
temperature display will immediately
show the changed setting. With each
further press of one of the two
buttons, the DESIRED temperature is
adjusted by
temperature range: +2°C to +8°C.
Note: From a food safety point of
view, +5°C for the refrigerator
compartment
considered cold enough as a storage
temperature.
5. Once the required temperature has
been set, after a short period (approx.
5 sec.) the temperature display will
change and again indicate the current
ACTUAL temperature inside the fridge.
The display will change from flashing to
continuous illumination. The compressor
will start and then run automatically.
Information! When the setting is
changed, the compressor does not start
immediately if automatic defrosting is
currently taking place.
over and the
1°C. Adjustable
should be
As the storage temperature within
the fridge is reached quickly you
can store food immediately after
switching on.

SUPERCOOL

SUPERCOOL Button
The SUPERCOOL function is
suited for quick cooling of large
quantities
refrigerator, e.g. drinks and salads
for a party.
1. The SUPERCOOL
switched on
SUPERCOOL button. The yellow light
illuminates.
2. The SUPERCOOL function now
ensures intensive cooling. A DESIRED
temperature of +2°C is automatically
selected. The SUPERCOOL function
is ended automatically after a period of
6 hours. The originally selected
DESIRED temperature is again valid
and the compartment will return to.
The temperature display shows the
ACTUAL refrigerator temperature.
3. The SUPERCOOL function can be
ended manually at any time by
pressing the SUPERCOOL button
again. The yellow light goes out.
If the SUPERCOOL function is
switched on the temperature
setting may not be changed.
Switching off the Appliance
To switch off, press the ON/OFF button
for approx. 3 seconds. This will result in a
countdown from "3" to "1" taking place in
the temperature display. On reaching "1"
the fridge will switch off. The temperature
display will go off.
Note: The appliance cannot be switched
on or off if unplugged, or if there is no
of goods in
function
by pressing
the
is
the