The screen capture function loads image data displayed on the EL-94xx/96xx on the
PC.
1 Setting a Communication Port
Perform the same procedure as in step 1 or from "1 Setting a Communication Port"
on page 11, and then set the communication port.
2 Loading Image Data
Load image data displayed on the EL-94xx/96xx.
1. Display the contents to be loaded on the EL-94xx/96xx display.
2. Select the Screen Capture from the Link menu.
The Load screen is displayed to load image data.
3. After the completion of loading, the loaded image data is displayed with the
Screen Image screen.
3 Saving and Printing Image Data
Image data can be saved in a file and printed by a printer connected to the PC.
(1) Saving
1. Load the image data.
2. Select the Save As... from the File menu.
The Save As screen is displayed.
3. Specify the drive and folder, and then enter the file name and "tif" or "bmp"
extension.
4. Click on the OK button.
(2) Printing
1. Open or load the image data.
2. If necessary, specify the Print image percentage for printing.
3. Select the Print... from the File menu.
The Print Setting screen is displayed.
4. If necessary, specify items such as the range and the number of copies.
5. Click on the OK button.
The Print Run screen is displayed, and then the contents displayed on the screen
are printed.
18
Screen Capture