Starting And Exiting Pc Link - Sharp CE-LK1P Bedienungsanleitung

Starting and Exiting PC LINK

1 Starting the PC LINK
Select Start → → → → → Programs → → → → → SHARP PC-LINK for EL-94xx_96xx → → → → → SHARP
CE-LK1P to start the PC LINK.
After the Startup screen, the Start screen is displayed with the menu bar and icons.
2 Exiting the PC LINK
Select the Exit from the File menu, or double-click on the CLOSE box at the upper-
most-left corner on the screen.
Note: If a communication will not be available, check the settings of the communication
(COM) port and the cable connection. If these procedures will not solve the
problem, set the Power Management and the screen saver to OFF.
(See Readme.txt for details.)
9