Changing The Side Light - Dd 8765; Special Accessories; Technical Assistance Service - AEG DD 8795 Benutzerinformation

Changing the side light – DD 8765
• Disconnect the cooker hood from the mains
supply.
• Prior to touching the light bulbs ensure
they are cooled down.
• Remove the front and side panels (for
the latter proceed in reverse order to
the montage – see operations 10-11 of
the "wall mounting" paragraph on the
following pages).
• Replace the old bulb with a new one of
the same type.
• Refit the side and front panels.
• If the light does not come on, make
sure the bulb has been inserted
correctly before contacting your local
Service Force Centre.

Special accessories

Remote control RM 7000*
Telescopic chimney K 8004 M* (for extraction mode only)
Stainless steel side panels BD 8004 M* (Only DD 8794)
Aluminium side panels BD 8004 A
Glass side panels BD 8004 W (only DD 8794-DD 8795-HD 8795)
Charcoal filter Type 31
* Not available in UK.
Technical assistance service (not for UK)
You are welcome to telephone our technical assistance service (see list of technical
assistance centres) whenever you need information or in the unlikely event of a fault.
For service in Australia call 1300 650 020.
When calling, please be ready to specify:
1. The model code number
2. The serial number (E-Nr.)
3. The manufacturing number (F-Nr.)
This information is shown on the registration plate inside the unit behind the
grease filter.
We reserve the right to change specifications and colours as a result of our policy of
continuing technological development.
Fig. 9
63