LD Systems MAUI 28 G2 Bedienungsanleitung Seite 12

Tweeter Magnet:
Tweeter Brand:
Tweeter Voice Coil:
Tweeter Voice Coil (mm):
Loudspeaker Inputs:
Speaker Input Connections:
Cabinet Construction Mid/High:
Mid/Hi System Cabinet Material:
Mid/Hi System Cabinet Surface:
Mid/Hi System Width:
Mid/Hi System Height:
Mid/Hi System Depth:
Mid/Hi System Weight:
Amplifier Module (integrated in Subwoofer)
Amplifier:
Amplifier Output Power System
(RMS):
Amplifier Output Power System
(Peak):
Protection Circuits:
Cooling:
Controls:
Indicators:
Power Connector:
Operating Voltage:
Power Consumption Off / On / Max.:
Ambient Temperature (in operation):
Humidity Range:
Line Inputs:
Line Input Connectors:
Line Outputs:
Line Output Connectors:
Mic Inputs:
Mic Input Connectors:
MP3 Inputs:
MP3 Input Connectors:
HI-Z Inputs:
Hi-Z Input Connectors:
Loudspeaker Outputs:
Speaker Output Connections:
DSP Characteristics
Bit depth AD/DA Converter:
Internal Sampling Frequency:
Signal/noise ratio:
12
Neodymium
Custom made
1"
25.4 mm
1
Custom-made multi-pin
Closed
Aluminium
HD coating
96 mm
780/ 795 mm
104 mm
5.6 / 5.6 kg
3-way Class D
1000 W
2000 W
Thermal overload, multiband limiter, short circuit, DC protection
Convection
Mic level, sub level, line level, MP3/Bluetooth level, Hi-Z level, main level, mono/stereo switch,
bluetooth button
on, signal, limit, protect, mono/stereo, setup
IEC (power cable included)
Switching power supply, 100 V AC - 120 V AC, 50 - 60 Hz, 200 V AC - 240 V AC, 50 - 60 Hz
(automatic conversion)
0 / 11 / 600 W
0°C - 40°C
10% - 80% rel. (non condensing)
2 x stereo
RCA, XLR/6.3 mm jack
2 (1x System Out, 1x Sub Out)
XLR
1
XLR / 6.3 mm jack
1
3.5 mm jack
1
6.3 mm jack
1
custom-made multi-pin
24 bit
48 kHz
100 dB