Küppersbusch IKE458014T Benutzerinformation Seite 6

6
FastFreeze function
You can activate the FastFreeze function by
pressing the FastFreeze switch.
TheFastFreeze light will light up.
Fridge Control panel
1. Pilot light
2. ON/OFF switch
3. Temperature regulator (warmest)
4. Temperature indicator
5. Temperature regulator (coldest)
6. IntensiveCooling light
7. IntensiveCooling switch
Switching on
1. Insert the plug into the wall socket.
2. Press the ON/OFF switch.
The Pilot Light will light up.
Switching off
The freezer is shut off by pressing ON/OFF
switch until the Pilot light and the
Temperature indicator switched off.
Temperature regulation
The temperature can be adjusted between
+2°C and +8°C.
By pressing the Temperature regulators,
the current temperature setting flashes on
the Temperature indicator. It is possible to
modify the setting temperature only with
flashed indicator. To set a warmer
temperature, press warmest Temperature
regulator. To set a colder temperature,
press coldest Temperature regulator. The
Temperature indicator displays the newly
This function stops automatically
after 52 hours.
It is possible to deactivate the
function at any time by pressing
FastFreeze switch.
The FastFreeze light will switch
off.
1 2 3 4
selected temperature for a few seconds
and then shows again the inside
compartment temperature.
The newly selected-temperature must be
reached after 24 hours.
Temperature indicator
During normal functioning the Temperature
indicator shows the temperature inside the
freezer.
The difference between the
temperature displayed and
temperature setting is normal,
especially when:
• a new setting has recently
been selected
• the door has been left open
for a long time
• warm food has been placed
in the compartment.
IntensiveCooling function
The maximum performance is obtained by
setting the IntensiveCooling function. It's
recommended when loading large
quantities of food.
You can activate the IntensiveCooling
function by pressing the IntensiveCooling
switch.
5 6 7