Seite 3
SC iKonn 220 – Kompakter Akkuträger mit 220 Watt und Powerbank-Funktion Nutzerhinweise Vielen Dank, dass Sie sich für ein Produkt von SC – eine Marke von InnoCigs – entschieden haben! Bei unserem gesamten Sortiment legen wir großen Wert auf hohe Qualitäts- und Sicherheitsansprüche� Wir wünschen Ihnen viel Spaß...
SC iKonn 220 - Hinweise & Vorsichtsmaßnahmen Personen unter 18 Jahren, Schwangere, stillende Mütter und Menschen mit Herz-Kreislauf-Erkrankungen dürfen dieses Produkt nicht verwenden� Nicht empfohlen für Nichtraucher� Das E-Zigaretten-Produkt darf nicht in die Hände von Kindern und Jugendlichen gelangen� Dieses Produkt darf Dieses Produkt besteht teils aus wiederverwertbaren nicht von Minderjährigen verwendet...
SC iKonn 220 - Hinweise & Vorsichtsmaßnahmen Benutzerhinweise 1� Sollte Ihnen das Gerät heruntergefallen sein, überprüfen Sie bitte, ob sich keine Komponenten gelockert haben, ob kein Liquid austritt und ob kein Defekt an Ihrem Mundstück vorliegt� Sofern nach visueller Prüfung des Produkts kei- ne Anzeichen einer Beschädigung vorliegen, können Sie das Gerät weiterbenutzen�...
SC iKonn 220 - Hinweise & Vorsichtsmaßnahmen 8� Das Inhalieren nikotinhaltigen Liquids kann die Herzfrequenz und/oder den Blutdruck erhöhen� Nikotin kann Übelkeit, Schwindel und/oder Magenschmerzen verursachen� Wenn Sie an sich oder Menschen in Ihrer Umgebung unerwünschte Wirkungen feststellen, verwenden Sie dieses Produkt bitte nicht weiter und konsultieren Sie einen Arzt�...
SC iKonn 220 - Bedienung des Geräts Bedienungshinweise Bitte laden Sie die beiden benötigten, wechselbaren 18650er Akkus vor der ersten Inbetriebnahme vollständig auf� Achten Sie bitte darauf, dass Sie qualitativ hochwertige Markenware verwenden� Bitte beachten Sie die Kennzeich- nung der Plus- und Minus-Pole im Akkufach� Achten Sie unbedingt darauf, dass die Oberfläche der Akku-Zellen keine Beschädigung aufweist�...
SC iKonn 220 - Bedienung des Geräts Display-Anzeige On/Off Halten Sie die Feuer- und die Ab-Taste beim eingeschalteten Gerät gleichzeitig gedrückt, um zwischen dem Stealth-On- und dem Stealth-Off-Modus zu wechseln� Im Stealth-On-Modus können Sie mit deaktiviertem OLED-Bildschirm dampfen� Betätigen Sie die Feuertaste, um sich Ihre aktuellen Einstellungen im Stealth On-Modus kurz anzeigen zu lassen�...
SC iKonn 220 - Bedienung des Geräts Individuelles Logo hochladen Laden Sie die Datei von der offiziellen Webseite (http://www.eleafworld.com/download/) herunter� Verbinden Sie das Gerät über das USB-Kabel mit dem Computer und machen Sie einen Doppelklick auf die Datei EleafUpdate�exe� Klicken Sie anschließend auf “Logo” und laden Sie Ihr gewünschtes Foto hoch� Drücken Sie die Feuertaste zwei Mal schnell hintereinander und betätigen Sie die Einstelltaste „Auf“...
SC iKonn 220 - Bedienung des Geräts Aufladen von weiteren E-Zigaretten Akkus Schrauben Sie einen RC Adapter (nicht im Lieferumfang enthalten) auf das Gerät und verbinden Sie diesen per USB-Kabel mit einem anderen Akkuträger� Halten Sie beim ausgeschalteten Gerät die Auf- und die Feuertaste gleichzeitig gedrückt bis der Modus M1 erscheint�...
SC iKonn 220 - Regelung der Leistungs- und Temperaturabgabe Allgemeine Bedienung zur Regelung der Leistungs- und Temperaturabgabe Die Leistung des Geräts kann bis zu 220 Watt betragen� Eine Änderung der Wattzahl verändert auch den Geschmack und das Dampfverhalten� Je höher die eingestellte Wattzahl ist, desto intensiver ist die Dampfentwicklung� Ähnlich verhält es sich mit der Temperature Control: Je höher die Temperatur, desto größer ist die Dampfentwicklung�...
SC iKonn 220 - Erläuterungen zu den Betriebsmodi VW-Modus (Variable Wattage) Im VW-Modus werden Verdampferköpfe in einem Widerstandsbereich zwischen 0,1 Ohm und 3,5 Ohm unterstützt� Die Leistung kann im VW-Modus – je nach verwendetem Verdampferkopf – zwischen 1 Watt und 220 Watt liegen�...
SC iKonn 220 - Bedienung & Wechsel der Betriebsmodi Wechseln zwischen den Betriebsmodi Drücken Sie die Feuertaste drei Mal schnell hintereinander, um das Menü aufzurufen und Ihren aktuellen Vaping-Modus zu sehen� Betätigen Sie die Einstelltasten, um zwischen den Modi VW, USB (sofern die USB-Funktion aktiviert ist), TC-Ni, TC-Ti, TC-SS316, TCR (M1, M2, M3)�...
SC iKonn 220 - Bedienung & Wechsel der Betriebsmodi Einstellungen im TCR-Modus (M1, M2, M3) 1� Drücken Sie die Feuer- und die Auf-Taste beim ausgeschalteten Gerät gleichzeitig für ein paar Sekunden, um in das TCR-Menü zu gelangen� 2� Drücken Sie die Feuertaste, um zwischen TCR M1, M2 und M3 zu wechseln�...
SC iKonn 220 - Bedienung & Wechsel der Betriebsmodi Sperren/Entsperren des Verdampferwiderstandes im TC-/TCR-Modus Drücken Sie die Feuer- und die Auf-Taste beim ausgeschalteten Gerät gleichzeitig für ein paar Sekunden, um den Basiswiderstand zu sperren oder zu entsperren� Das “Lock”-Zeichen erscheint auf dem Display� Das „Ω“-Symbol erscheint erst wieder bei entsperrten Verdampfer�...
SC iKonn 220 - Fehlermeldungen & Schutzfunktionen Über 10 Sek�-Schutz Wenn Sie die Feuer-Taste länger als 10 Sekunden gedrückt halten, schaltet sich das Gerät automatisch ab� Das Display zeigt „OVER 10s“ an� Widerstand zu gering Sinkt der Widerstand der Spule im VW- oder Bypass-Modus unter 0,1 Ohm oder im TC-Modus unter 0,05 Ohm, so erscheint im Display „ATOMIZER LOW“�...
SC iKonn 220 - Fehlermeldungen & Schutzfunktionen Temperaturschutz Erreicht die Wicklung im TC Modus die eingestellte Soll-Temperatur, zeigt der Bildschirm „TEMP PROTECTION“ an� Sie können das Gerät ganz normal weiter verwenden� Temperatur-Alarm Liegt die Temperatur des Gerätes oberhalb der Alarm-Temperatur, schaltet sich das Gerät automatisch ab und im Display erscheint „DEVICE TOO HOT“�...
SC iKonn 220 - Fehlermeldungen & Schutzfunktionen Batterie überprüfen Wenn die Zellen nicht richtig in den Akkuträger eingesetzt wurden, erscheint im Display „CHECK BATTERY“. Ladefehler Wird während des Aufladens keine Stromquelle erkannt, erscheint im Display „CHARGE ERROR“� USB Alarm Ist die Spannung des Ladegeräts ≥ 5,8 Volt, erscheint im Display „CHECK USB“ bei eingestecktem USB Kabel�...
Sie sich gerne an unseren Kundenservice� Verwenden Sie das Gerät in keinem Fall in Kombination mit Produkten anderer Hersteller und nur mit SC Produk- ten, die zur Verwendung mit dem Gerät als geeignet gekennzeichnet sind� Wir weisen ausdrücklich darauf hin, dass wir für Schäden, die bei unsachgemäßer Verwendung des Produkts auftreten können, keine Haftung übernehmen...
SC iKonn 220 – Box compacte 220 W à fonction chargeur portatif Informations préalables Nous vous remercions d‘avoir choisi SC, une marque d‘InnoCigs ! Pour toute notre gamme, nous accordons une grande importante aux normes de qualité et de sécurité� Nous vous souhaitons beaucoup de plaisir en vapotant avec votre nouvelle cigarette électronique !
SC iKonn 220 - Indications et mesures de précaution Les personnes âgées de moins de 18 ans, les femmes enceintes, les mères allaitantes et les personnes souffrant de maladies cardiovasculaires ne doivent pas utiliser ce produit� Déconseillé aux non-fumeurs� Tenir cet accessoire pour cigarette électronique hors de portée des enfants et des adolescents�...
SC iKonn 220 - Indications et mesures de précaution Recommandations d‘utilisation 1� Si vous avez fait tomber votre appareil, veuillez vérifier qu‘aucun composant ne se soit desserré, qu‘aucun liquide ne s‘écoule et que votre embout ne présente aucun défaut� Dans la mesure où, après un contrôle visuel, le produit ne présente aucun dommage, vous pouvez continuer de l‘utiliser�...
Seite 28
SC iKonn 220 - Indications et mesures de précaution 8� Inhaler des produits contenant de la nicotine peut augmenter la fréquence cardiaque et/ou la pression sanguine� La nicotine peut entraîner des nausées, des vertiges et/ou des maux d‘estomac� Si vous constatez des effets indésirables sur vous-même ou sur des personnes de votre entourage, veuillez ne plus utiliser ce produit et consulter un médecin�...
SC iKonn 220 - Contenu de la livraison | Structure de l’appareil Contenu de livraison SC iKonn 220 1x Box iKonn 220 (sans cellules de batterie 18650) 1x Câble de recharge QC USB 1x Manuel d’utilisation Structure de l’appareil Bouton de réglage « Bas »...
SC iKonn 220 - Utilisation de l‘appareil Mode d‘emploi Chargez complètement les deux accus 18650 échangeables requis avant de procéder à la mise en service initiale� Veillez à utiliser des produits de marques de grande qualité� Veuillez tenir compte du marquage des pôles Plus et Moins indiqué...
SC iKonn 220 - Utilisation de l‘appareil Allumer/éteindre l‘écran Appareil allumé, appuyez en même temps sur la touche d‘allumage et sur le bouton « Bas », afin de passer du mode Stealth On au mode Stealth Off� En mode Stealth On, vous pouvez vapoter avec l’affichage OLED désactivé�...
Seite 32
SC iKonn 220 - Utilisation de l‘appareil Réglage de la fonction de préchauffage Appareil éteint, appuyez en même temps sur la touche d‘allumage et le bouton « Haut » jusqu’à ce que le mode M1 s’affiche� Après avoir appuyé 3 fois sur le bouton d‘allumage, le message « POWER » s‘affiche sur l‘écran� Appuyez sur le bouton de réglage «...
SC iKonn 220 - Utilisation de l‘appareil Recharger la batterie Vous pouvez recharger l‘appareil en le branchant avec un câble USB sur un PC, sur une prise avec un adaptateur, ou avec un appareil externe après y avoir placé les accus�...
SC iKonn 220 - Règlement du puissance et de la température Généralités concernant le réglage de la puissance et de la température La puissance de l‘appareil peut aller jusqu‘à 220 watts� Une modification de la puissance modifie le goût et la production de vapeur�...
SC iKonn 220 - Explications des modes de fonctionnement Mode VW (Variable Wattage) En mode VW, les têtes d‘atomiseur fonctionnent avec une plage de résistance de 0,1 à 3,5 Ohm� La puissance peut aller de 1 à 220 W, selon la tête d‘atomiseur utilisée�...
SC iKonn 220 - Sélection et utilisation des modes Changer de mode de fonctionnement Appuyez rapidement trois fois d‘affilée sur le bouton fire afin de consulter le menu et de voir votre mode de vapotage actuel� Appuyez sur les boutons de réglage afin de sélectionner un mode entre VW, USB (si la fonction USB est activée), TC-Ni, TC-Ti, TC-SS316, TCR (M1, M2, M3)�...
Seite 38
SC iKonn 220 - Sélection et utilisation des modes Configuration en mode TCR (M1, M2, M3) 1� Appareil éteint, appuyez en même temps sur la touche d‘allumage et le bouton de réglage « Haut » pendant quelques secondes pour accéder au menu TCR�...
Seite 39
SC iKonn 220 - Sélection et utilisation des modes Blocage/déblocage de la résistance de l‘atomiseur en mode TC/TCR En mode TC et TCR appuyer simultanément sur le bouton d‘extinction et sur le bouton « haut » Verrouiller ou déver- rouiller la «résistance de base» de l‘atomiseur� Le signe de verrouillage apparaît lorsque la résistance est verrouillée et que le symbole «...
SC iKonn 220 - Messages d‘erreur et fonctions de protection Protection « plus de 10 secondes » Si la résistance de la bobine tombe en deçà de 0,1 Ohm en mode VW ou en deçà de 0,05 Ohm en mode TC ou TCR, le message «...
SC iKonn 220 - Messages d‘erreur et fonctions de protection Batterie faible Si la tension de la batterie chute en-deçà de 2,9 V, l‘appareil indique « WEAK BATTERY ». La puissance de sortie est réduite pour être adaptée à la tension�...
N’utilisez en aucun cas l’appareil en combinaison avec des produits d’autres fabricants et uniquement avec les produits SC compatibles� Nous vous indiquons expressément que nous rejetons toute responsabilité concernant les dommages qui surviennent à la suite d’une utilisation non-conforme du produit et que, le cas échéant, la...
Instructions for the User Thank you for choosing a SC product – a brand by InnoCigs! We place great value on high quality and safety standards across our entire range� We hope you enjoy vaping with your new e-cigarette product! Read the usage instructions carefully before use in order to ensure correct use of the device�...
SC iKonn 220 - Notes & Precautions Persons under 18 years, pregnant women, nursing mothers and people with cardiovascular disease should not use this product� Not recommended for non-smokers� Please keep out of the reach of children� This product must not This product is in parts made of reusable materials that can be used by minors�...
Seite 47
SC iKonn 220 - Notes & Precautions User Instructions 1� If the device is dropped, you should check that there are no loose components, that there is no leakage of e-liquid, and that the mouthpiece is not damaged� If there are no signs of damage upon visual inspection of the product, you can continue using the device�...
Seite 48
SC iKonn 220 - Notes & Precautions 8� Nicotine can increase the heart rate and / or blood pressure and cause nausea, dizziness, and / or abdominal pain� If you notice any undesirable effects, discontinue use and consult a physician�...
SC iKonn 220 - Contents | Design of the Device Contents of the SC iKonn 220 1x iKonn 220 Box Mod (without 18650 battery cells) 1x QC USB Charging Cable 1x User Manual Design of the Device “Down” Button Fire Button...
SC iKonn 220 - Using the Device Notes for Commissioning Fully charge the two necessary and replaceable 18650 batteries before first use� Please ensure that you use a high-quality brand� Please note the positive and negative poles in the battery compartment� Ensure that there is no visible damage to the surface of the battery cells�...
SC iKonn 220 - Using the Device Display On/Off Press and hold the Fire and Down buttons simultaneously while the power is on to switch between Stealth-On and Stealth-Off modes� In stealth-on mode, you can vape with the OLED screen off� Press the Fire button to show your current settings briefly in Stealth-On mode�...
SC iKonn 220 - Using the Device Upload individual Logos Download the file from the official website (http://www.eleafworld.com/download/)� Connect the device to the computer using the USB cable and double-click the file EleafUpdate�exe� Then click on “Logo” and upload your desired photo�...
Seite 53
SC iKonn 220 - Using the Device Charging additional E-Cigarette Batteries Screw an RC adapter (not included) onto the device and connect it to another battery holder using a USB cable� With the power off, press and hold down the Up and Fire buttons simultaneously until M1 Mode appears� Press the Fire button 5 times to access the USB function�...
SC iKonn 220 - Regulating the Power Output & the Temperature Common Procedures for Regulating the Power Output and the Temperature The device output can range up to 220 watts� Changing the wattage will also change the taste and the vapor behavior�...
SC iKonn 220 - Explanations to the Vaping Modes VW Mode (Variable Wattage) The VW mode supports atomizer heads in a resistance range of 0�1 ohm to 3�5 ohms� In VW mode, the power – depending on the atomizer head used – can be between 1 and 220 watts�...
SC iKonn 220 - Selection & Operating of the Modes Switching between Operating Modes Press the Fire button three times quickly to enter the menu and see your current vaping mode� Press the setting buttons to switch between VW, USB (if the USB function is activated), TC-Ni, TC-Ti, TC-SS316, and TCR (M1, M2, M3) modes�...
SC iKonn 220 - Selection & Operating of the Modes Settings in TCR Mode (M1, M2, M3) 1� Press the Fire button and the Up button simultaneously for a few seconds while the device is switched off to enter the TCR menu�...
SC iKonn 220 - Selection & Operating of the Modes Lock / Unlock Resistance in TC / TCR Mode In TC and TCR mode, when the device is powered on, keep pressing the Fire button and the Up button simulta- neously for two seconds to lock or unlock the atomizer heads “base resistance”�...
SC iKonn 220 - Error Messages & Protections Over 10 Second Protection If you press and hold the Fire button for more than 10 seconds, the unit will automatically switch off� The display will show „OVER 10s“� Atomizer Low Alarm If the coil resistance drops below 0�1 ohm in VW or Smart mode or below 0�05 ohm in TC mode, the display will...
SC iKonn 220 - Error Messages & Protections Temperature Alarm If the temperature of the device rises beyond its permissible limit, it will switch off automatically and „DEVICE TOO HOT“ will appear on the display� You can continue vaping after the device has cooled down�...
Seite 62
SC iKonn 220 - Error Messages & Protections USB Alarm If the voltage of the charging adapter is ≥ 5�8 volts, the display will show „CHECK USB“ when the USB cable is inserted� Resistance Protection/No Atomizer Head detected If the resistance of the device exceeds 3�0 ohm, the LED Light flashes slowly� If the resistance drops below 0�15...
Please do not use accessories from other manufacturers in combination� Please use only with SC products labeled as suitable for use with the device� We expressly point out that we cannot accept liability for damages which may...