Air Controller; Regulation Of Combustion Air - Konigshutte Virgo Anleitung

Air controller

Primary air controller: CLOSED
Secondary air controller: OPEN

Regulation of combustion air

Primary air controller
OPEN ....Ignition adjustment and max. heating output
OPEN ....Nominal heat output with lignite briquettes
CLOSED .... Nominal heat output with billet wood
CLOSED .... Nominal heat output with wood briquettes
CLOSED .... glow
Secondary air controller
OPEN ....Ignition adjustment and max. heating output
1/5 OPEN .. Nominal heat output with lignite briquettes
OPEN ....Nominal heat output with billet wood
OPEN ....Nominal heat output with wood briquettes
CLOSED .... glow
● As the secondary air also contributes to the cleanli-
ness of the glass pane, the secondary air controller
must always be moved in the direction of the open
position while the stove is lit.
OPEN
● When not operating all controllers should be closed,
to reduce the cooling down of the room.
As the performance of your stove is very much depend-
ent on the chimney draught, the primary air controller
has to be adjusted according to your own experience.
Please note that you should not use your stove if there
is not an adequate air supply (slide valve setting too
low), as this causes the emissions to increase.
CLOSED
15