JVC EXAD KD-AV7001 Bedienungsanleitung Seite 85

○ ○ ○ ○ ○ ○ ○ ○ ○
Monitor Adjustments
• You may not able to adjust the brightness in
the following case:
– You cannot make it brighter when the
ambient light is very bright.
– You cannot make it darker when the
ambient light is very dark.
○ ○ ○ ○ ○ ○ ○ ○ ○
Initial Setup—DVD MENU
MENU/AUDIO/SUBTITLE LANGUAGE
• When the language you have selected is not
recorded on a disc, the original language is
automatically used as the initial language. In
addition, for some discs, the initial languages
settings will not work as you set due to their
internal disc programming.
• Language setting change cannot be effective
while playing (or pausing). After you change
the language setting, eject the disc and insert
it (or another disc) again so that your setting
takes effect.
MONITOR TYPE
• When you select "16:9 NORMAL" for a
picture whose aspect ratio is 4:3, the picture
slightly changes due to the process for
converting the picture width.
• Even if "4:3 PS" is selected, the screen size
may become "4:3 LB" with some DVDs.
This depends on how they are recorded.
○ ○ ○ ○ ○ ○ ○ ○ ○
Initial Setup—AUDIO MENU/PSM
• If you change the "AMP GAIN" setting from
"HIGH" to "LOW" while the volume level is
set higher than "30," the unit automatically
changes the volume level to "30."
○ ○ ○ ○ ○ ○ ○ ○ ○
Other Main Functions
Assigning titles to the sources
• When the CD changer is connected, you can
assign titles to CDs in the CD changer. These
titles can also be shown on the display if you
insert the CDs in this unit.
○ ○ ○ ○ ○ ○ ○ ○ ○
TV Tuner Operations
Storing stations in memory
• When Auto Memory is carried out...
– All TV stations previously stored are erased
and TV stations are stored newly.
– Received TV stations are preset in No.1
(lowest frequency) to No.12 (highest
frequency). When Auto Memory is over,
the TV station stored in No.1 will be
automatically tuned in.
• When storing a TV station manually, a
previously preset TV station is erased when a
new TV station is stored in the same preset
number.
• Preset TV stations are erased when the power
supply to the memory circuit is interrupted
(for example, during battery replacement). If
this occurs, preset the stations again.
○ ○ ○ ○ ○ ○ ○ ○ ○
DAB Tuner Operations
• PTY Standby Reception works for the DAB
tuner only using a Dynamic PTY, but not a
Static PTY.
• TA Standby Reception and PTY Standby
Reception works for both DAB services and
FM RDS stations.
85