Control Panel; Temperature Indication - Küppersbusch IKE 309-6-2T Gebrauchs- Und Montageanleitung

Control panel

B
A
A - Applinace button ON/OFF
B - Freezer Thermostat control knob
C - Temperature indication button
DISPLAY
1. If on, the indicated temperature is that of the
fridge compartment;
if it flashes, the alarm corresponds to the
relative compartment.
2. If on, the indicated temperature is that of the
freezer compartment;
if it flashes, the alarm corresponds to the
relative compartment.
Operation
After plugging the plug into the power outlet, if the
display is not illuminated, press key (A), appliance on.
As soon as the appliance is turned on, the following
signals will appear on the control panel:
• symbol (3) will be positive, indicating that the
temperature is positive.
• the temperature flashes, the background of the
display is red and you will hear a buzzer. Press key
(E) and the buzzer will go off (also see the section
on "excessive temperature alarm").
By turning the knob the display flashes and shows
the desired temperature. For a correct storage of
the food the following temperatures should be set:
+5°C in the fridge
-18°C in the freezer
Important
If the door remains ajar for more than 7 minutes, the
internal lighting will turn off electronically; after this, the
lighting function will be reset by opening and closing
the door itself.
C
D
3 4
1 2
E
D - Temperature and function indicator
E - Function button/ reset alarm
F - Fridge Thermostat knob
5 6
3. positive and negative Temperture indicator
4. Temperature indicator
5. If on the fast freeze funcion is on
6. If on the Performance optimization function is on
7. If on the minidac is on
8. If on the shopping function is on

Temperature indication

In normal conditions, the display indicates the freezer
temperature (symbol 2).
Each time key C is pressed, the display indicates in
sequence:
1. symbol 1 turns on and indicator 4 shows the
temperature of the fridge compartment;
2.symbol 2 turns on and indicator 4 shows the
temperature of the freezer compartment.
In any case, after 10 seconds normal display
conditions are restored.
F
19