SETTING AND STARTING A WASHING PROGRAMME
STARTING THE WASHING
PROGRAMME WITHOUT DELAY
START
1. Activate the appliance.
2. Make sure that the appliance is in set-
ting mode.
3. Set the washing programme.
• The related programme indicator
comes on.
• The programme time flashes in the
display.
4. Close the appliance door, the washing
programme starts automatically.
STARTING THE WASHING
PROGRAMME WITH DELAY START
1. Activate the appliance.
2. Make sure that the appliance is in set-
ting mode.
3. Set the washing programme.
4. Press the delay button again and again
until the display shows the time of the
delay start.
• The time of the delay flashes in the
display.
• The delay indicator is on.
5. Close the appliance door, the count-
down starts automatically.
• When the countdown is completed,
the washing programme starts auto-
matically.
The opening of the appliance door in-
terrupts the countdown. When you
close the door, the countdown contin-
ues from the point of interruption.
CANCELLING THE DELAY START
If the appliance door is open, and the
countdown has not started
1. Press the delay button again and again
until the display shows the time of the
washing programme.
• The time flashes in the display.
2. Close the appliance door, the washing
programme starts automatically.
If the appliance door is closed, and the
countdown operates
1. Open the appliance door.
2. Press the delay button again and again
until the display shows the time of the
washing programme.
3. Close the appliance door, the washing
programme starts automatically.
INTERRUPTION OF A WASHING
PROGRAMME
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues
from the point of interruption.
CANCELLING THE WASHING
PROGRAMME
If the washing programme has not started,
you can change the selection.
To change the selection while the washing
programme operates, it is necessary to
cancel the programme.
1. Press and hold at the same time, func-
tion buttons (B) and (C) until all the pro-
gramme button indicators come on.
2. Release function buttons (B) and (C).
The set programme is cancelled.
Make sure that there is detergent in the
detergent dispenser before you start a
new washing programme.
END OF THE WASHING PROGRAMME
When the washing programme is comple-
ted, an intermittent acoustic signal sounds.
1. Open the appliance door, the display
shows a zero.
2. Deactivate the appliance.
For better drying results, keep the ap-
pliance door ajar for some minutes.
REMOVE THE ITEMS FROM THE
BASKETS
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless steel
becomes cool more quickly than the
dishes.
electrolux 27