INNOCIGS EGRIP 2 LIGHT Bedienungsanleitung Seite 51

INNOCIGS EGRIP 2 LIGHT – CHANGING & OPERATING OF MODES
Changing between the VT-Ni, Ti-VT, VT SS316, VW, bypass, TCR mode:
Press the fire button three times in quick succession to enter the menu. The display will indicate you are in the settings menu by
flashing. Press the "up" button to toggle between TEMP (VT), TCR, POWER (VW) and BYPASS modes. Press the fire button or wait
until the display flashes ten times to confirm the current settings and exit the menu.
1. To select the TEMP or TCR mode, press the "down" button while the display is flashing to enter the submenus VT, PWR, COIL and
AMP. When adjusting VT, press the "up" button to switch among Temp NI, Temp TI, and Temp SS316 as well as M1, M2 and M3
mode. Press the fire button to confirm. When the AMP row is flashing, press the "up" button to switch among AMP, PUFF and
TIME.
2. After selecting the POWER or BYPASS mode, press the "down" button while the display is flashing to enter the submenus VT,
PWR, COIL and AMP. When the AMP row is flashing, press the "up" button to switch among AMP, PUFF and TIME.
49