Charging The Device - Aspire EVO75 Bedienungsanleitung

Charging the Device

Charging the Device
• Charging the NX75 via Micro-USB charging port, the maximum
current can reach up to 2A.
• Connect your NX75 mod to the charger and the screen will show
a flashing battery icon. When the battery charge reaches 4.2 V
or is fully charged, the mod will stop charging and the screen will
remain off.
• The battery can not be replaced while charging. Please unplug the
USB cable before changing your battery.
• When the battery charge drops below 0.5 V or battery incorrectly
installed the mod will stop charging.
• To accomplish 2A charge current, the adaptor output should be
5V/2A.
Please note the following:
The mod supports passthrough charging. To lengthen the life of the
mod, we do not recommend vaping while charging (passthrough).
39