Seite 3
Nautilus Mini Nutzerinformationen Vielen Dank, dass Sie sich für den Aspire Nautilus Mini Clearomizer entschieden haben! Bitte lesen Sie die Bedienungsanleitung vor Gebrauch sorgsam durch, um eine korrekte Nutzung des Nautilus Mini Clearomizers zu gewährleisten. Verwenden Sie in Kombination mit diesem Produkt bitte nur originale bzw.
Hinweise & Vorsichtsmaßnahmen Personen unter 18 Jahren, Schwangere, stillende Mütter und Menschen mit Herz-Kreislauf- Erkrankungen dürfen dieses Produkt nicht verwenden. Nicht empfohlen für Nichtraucher. E-Zigarettenprodukt für Kinder und Jugendliche unzugänglich aufbewahren. Dieses Produkt entspricht den innerhalb der Dieses Produkt darf nicht von Minderjährigen EU gültigen Bestimmungen für technische Geräte und darf in den Ländern der EU...
Luftfeuchtigkeit. Vermeiden Sie längere direkte Sonneneinstrahlung. 5. Die geeignete Temperatur für den Gebrauch des Nautilus Mini Clearomizers liegt bei -10°C bis 60°C. 6. Wenn Liquid mit Ihrer Haut in Berührung kommt, wischen Sie es schnellstmöglich ab und reinigen...
9. Beachten Sie bei der Nutzung von E-Zigaretten lokale Gesetze. 10. Halten Sie das Produkt von Kindern und Jugendlichen fern. Warnhinweis Der Nautilus Mini Clearomizer von Aspire kann mit nikotinhaltigem Liquid verwendet werden. Nikotin ist ein Stoff, der sehr stark abhängig macht.
Liquid. Er wird aus Pyrexglas und Edelstahl gefertigt. Das Gerät unterstützt die Aspire BVC (Bottom Vertical Coil) Verdampferkopf-Technology. Zwei BVC Verdampferköpfe (Heads) mit einem Widerstand von 1,8 Ohm sind im Set enthalten. Der Aspire Nautilus Mini verfügt über eine individuell regelbare Airflow Control.
Sie die Teile miteinander. Tank aus Pyrexglas 4. Stecken Sie das Mundstück auf das Gerät auf. Aspire BVC 5. Verbinden Sie den Nautilus Mini Clearomizer Verdampferkopf (Head) mit einem geeigneten Akkuträger. Für Ak- Airflow Control-Ring kuträger mit eGo-Gewinde liegt ein Gewin- dekegel bei, der das Anschließen ermöglicht.
Bedienung des Geräts Hinweise zur Inbetriebnahme Träufeln Sie vor dem ersten Gebrauch unbedingt einige Tropfen Ihres Liquids auf Ihren Verdampferkopf und lassen Sie ihn nach dem Installieren etwa 15 Minuten lang im mit Liquid befüllten Tank stehen, bevor Sie dampfen. Reinigen Sie den Verdampferkopf nicht mit Wasser. Wischen Sie ihn im Bedarfsfall lediglich mit einem trockenen Tuch ab.
Bedienung des Geräts Einfüllen des Liquids Entfernen Sie den Nautilus Mini Clearomizer vom Akkuträger und schrauben Sie die Verdampferkopf-Basis vom Tank, während das Mundstück zum Boden zeigt. Füllen Sie Ihr Liquid seitlich entlang der Innenwand ein. Schrauben Sie die Verdampferkopf-Basis wieder an den Glastank und stellen Sie sicher, dass kein Liquid austritt.
Bitte beachten Sie zudem die Hinweise auf Seite 08. Dampfen Während Sie die Feuer-Taste Ihres Akkuträgers gedrückt halten, inhalieren Sie den Dampf langsam und kontinuierlich über das Mundstück Ihres Nautilus Mini Clearomizers. Lassen Sie die Feuer-Taste Ihres Akkuträgers beim Ausatmen des Dampfes los.
Bedienung des Geräts Einstellen der Luftzufuhr Durchmesser der Lufteinlass-Löcher Durch Drehen des Airflow Control-Rings an der ø 0,9 mm Verdampferkopf-Basis passen Sie die Luftzufuhr an Ihre persönliche Dampfvorliebe an. Das Gerät verfügt über vier unterschiedlich große ø 1,1 mm Lufteinlass-Löcher mit einem Durchmesser von 0,9 mm, 1,1 mm, 1,4 mm bzw.
Eckdaten & Leistungsmerkmale Aspire Nautilus Mini Clearomizer Eckdaten Tankvolumen 2 ml Länge (inkl. Mundstück) 7,5 cm Durchmesser 1,9 cm Gewindetyp 510 (eGo Gewindekegel im Lieferumfang enthalten) Geeignete Verdampferköpfe Aspire BVC Head (1,6 Ohm | 1,8 Ohm) *Breite der Einfüll-Öffnung für Liquid...
Gewährleistung & Service Gewährleistungskonditionen der InnoCigs GmbH & Co. KG Das von Ihnen erworbene Aspire-Produkt wurde für Sie von der InnoCigs GmbH & Co. KG importiert. Sollte das Produkt nicht funktionieren oder in irgendeiner Weise defekt sein, so wenden Sie sich bitte direkt an den Fachhändler, von dem Sie das Produkt erworben haben. Bei Fragen rund um die Bedienung und Verwendung wenden Sie sich gerne an unseren Kundenservice.
The InnoCigs GmbH & Co. KG, as the official importer of this Aspire product, does not provide any service and / or warranty when non-recommended products are used together with this product.
Seite 18
Table of Contents Notes & Precautions ............. 17 Product Information &...
Notes & Precautions Persons under 18 years, pregnant women, nursing mothers and people with cardiovascular disease should not use this product. Not recommended for non-smokers. Please keep out of reach of children and minors. This product complies with EU require- This product must not ments on technical goods and may be be used by minors.
Seite 20
Avoid long periods of direct sunlight. 5. The recommended temperature range for using the Nautilus Mini clearomizer is -10°C to 60°C. 6. If e-liquid comes in contact with your skin, wipe it off as soon as possible and wash the area of contact.
Seite 21
9. Please comply with all local laws when using this e-cigarette product. 10. Keep product out of reach of children and minors. Warning The Aspire Nautilus Mini clearomizer can be used with nicotine-containing liquid. Nicotine is a highly addictive substance.
Product Information & Contents The Aspire Nautilus Mini Set The 510 threaded Nautilus Mini clearomizer has a volume of 2.0 milliliters of liquids. It is made of stainless steel and pyrex glass. The device supports the Aspire BVC (Bottom Vertical Coil) atomizer technology.
4. Insert the mouthpiece onto the top of the device. Air Tube Hardware 5. Connect the Nautilus Mini clearomizer with a suitable e-cigarette battery. The supplied Pyrex Glass Tank cone allows you to connect the device with eGo threaded batteries.
Using the Device Notes for Commissioning Prior to first use, drip a few drops of your liquid on the atomizer coil and let it sit before vaping. Please take several puffs without activating the atomizer and leave the atomizer sit for 15 minutes in the e-liquid filled tank before use.
Using the Device Filling of Liquids Separate the Nautilus Mini clearomizer from your battery and unscrew the head base from the glass tank, while the mouthpiece points to the ground. Fill the liquid sideways along the inner wall of the clearomizer tank. Screw the head base back onto the clearomizer by connecting with the air tube hardware and make sure that the clearomizer is firmly closed.
Please also follow the instructions on page 22. Vaping While holding the fire button of your e-cigarette battery, inhale the vapor slowly and continuously through the mouthpiece of your Nautilus Mini clearomizer. Release the fire button while exhaling the vapor.
Using the Device Adjusting the Air Supply Airflow hole sizes The airflow control is located on the head ø 0.9 mm base. By adjusting the ring it is adaptable to your vapor preferences. The device has four different-sized airflow holes with ø...
Main Features & Performance Aspire Nautilus Mini Clearomizer Key Data Tank Volume 2.0 ml Lenght (incl. Mouthpiece) 7.5 cm Diameter 1.9 cm Thread Type 510 (eGo threaded Cone is inclueded in the set) Suitable Atomizer Heads Aspire BVC Head (1.6 Ohm | 1.8 Ohm)
Warranty Terms of the InnoCigs GmbH & Co. KG The Aspire product you‘ve bought has been imported by the InnoCigs GmbH & Co. KG. If the product ceases functioning or is defective in any way, please contact the specialist retailer where you purchased the product.