JVC KW-NX7000 Bedienungsanleitung Seite 50

Function Menu —Map Settings
Menu items
Priority
Motorway
Toll Road
Ferry
Bypass Traffic
Attention Tone*
Guidance Volume*
Adaptive Volume
Output
Music Mix
Speed Alert
POI Alert
1
* When adjusting these items, test tone is produced.
Selectable settings, [reference page]
Fastest: The System calculates the shortest journey time.
Shortest: The System calculates the shortest route to the destination.
• This setting is effective next time the System calculates a route.
Select whether to use or avoid these types of roads to go to the
destination.
Use, Avoid
• These settings are effective next time the System calculates a route.
Auto, Manual, Off ☞ [47]
1
Select the type of attention tone, which comes out before voice guidance.
Off, Normal, Prompt, A.I.
1
Adjust the volume of the voice guidance.
00 to 10 (05)
When this function is activated, the System automatically increases the
guidance volume level as the car speeds up.
Off, Min, Mid, Max
Select the guidance output channel.
L ch., L+R ch., R ch.
You can turn down the volume of the AV source while voice guidance is
produced.
Mute: The AV source sound does not come out.
Att.: The AV source sound is lowered.
Normal: The AV source sound is not affected.
The System sounds an alarm when you surpass the speed limit of the
current road by the set value. The unit ("km/h" or "mph") follows the
<Scale Unit> setting. (☞ page 52)
Off, 5 km/h (3 mph), 10 km/h (6 mph), 15 km/h (10 mph),
25 km/h (15 mph), 35 km/h (20 mph)
Alert sounds when you approach a POI of the selected category.
• To select categories for POI alert, press [Edit], then select categories and
sub-categories (the selected items are marked with "√"). To activate POI
alert for selected categories, press [On]. To deactivate it, press [Off].
– You can select up to 3 categories.
50
Initial:
Underlined