The lamp does not flash
during battery pack
charging.
This unit heats up.
Warning Indications
Warning Indications
RECORDING FAILURE
DATA RECORDED FILE IS
TOO SMALL TO BE SAVED
MEMORY CARD ERROR!
Check the remaining battery power.
0
(When the battery pack is fully
charged, the lamp does not flash.)
When charging in either a hot or cold
0
environment, ensure that battery is
being charged within the permitted
temperature range. (Otherwise,
charging may stop to protect the
battery pack.)
This is not a malfunction. (This unit
0
may become warm when used for a
long time.)
Action
Turn off and on this unit again.
0
If the above does not solve the
0
problem, back up your files and
execute "FORMAT SD CARD" in the
"MEDIA SETTINGS" menu. (All data
will be deleted.)
When "TIME-LAPSE RECORDING"
0
is stopped with the recorded time
less than "0:00:00:14", the video will
not be saved.
Turn off and on this unit again.
0
Remove the AC adapter and battery
0
pack, then remove and re-insert the
SD card.
Remove any dirt from the SD card
0
terminals.
If the above does not solve the
0
problem, back up your files and
execute "FORMAT SD CARD" in the
"MEDIA SETTINGS" menu. (All data
will be deleted.)
8
-
8
-
Page
-
-
-
-
-
-
-
23