Get Started - Silk'n Glide Bedienungsanleitung

9. Get Started!

1. Remove Silk'n Glide™ HAIR REMOVAL DEVICE and other components from box.
2. Plug the ADAPTOR cord into the Silk'n Glide™ HAIR REMOVAL DEVICE socket.
3. Plug the ADAPTOR into an electrical outlet. All indicator lights in the CONTROL PAD will turn on and off
repeatedly in a circular motion.
Your Silk'n Glide™ is now ready to start.
Treat with Silk'n Glide™ safely and properly!
Choose areas to treat that have not had recent exposure to the sun.
4. The skin of the treatment areas should be shaved, clean, dry and free of any powders, antiperspirants or
deodorants. Do not wax, pluck or tweeze the hair out. Shaving is an important step to get the results you want!
Best results will be reached when you shave 3 days prior to the treatment or when the hair is 1-2 mm - 3/32 inch.
5. Press the CENTRAL BUTTON. The device will turn on, the Energy Level 1 INDICATOR LIGHT will turn on
and a fan sound will start.
6. Approximately 1 second after pressing the CENTRAL BUTTON, the READY/SKIN TONE WARNING
INDICATOR LIGHT will turn on. The device is then ready for you to trigger the first pulse at the lowest
energy level.
7. If this is your first treatment - Choose the energy level. Glide™ offers 5 levels of energy from 1 (the lowest) to
5 (the highest). To choose the right energy level for your first treatment, test each treatment area separately:
Place the TREATMENT SURFACE on the skin and press the trigger to deliver one pulse. If you did
not experience abnormal discomfort press the CENTRAL BUTTON again. This will increase the
energy level. Deliver one pulse on a different spot at energy level 2.
Continue testing at increased energy levels until you have reached the highest level that you feel
comfortable with. If within one hour you experience no adverse effects, you can start your full
treatment at that energy level.
Repeat this test for each body part you intend to treat.
8. Set the energy level. To set an energy level higher or lower, press the CENTRAL BUTTON repeatedly to
increase the energy level from 1 to 5 and from 5 directly back to 1, until the desired energy level is set.
The ENERGY LEVEL INDICATOR LIGHTS will indicate the energy level setting. (For details see "Energy
Level" chapter inside this user manual).
10